OBD code C0475 indicates an issue with the Electric Power Steering Motor.
Symptoms include the Engine Light being ON.
This code is commonly caused by a faulty Electric Power Steering Motor, open/shorted harness, poor electrical connection, or a faulty Power Steering Control Module.
It is a moderate issue that should be addressed promptly.
To fix it, inspect the wiring harness, connectors, and components for any damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the c0475 OBD Code
The vehicle displays an issue with the Electronic Suspension Control Module (ESCM) circuit malfunction (C0475).
- Symptoms: Service Stability System message on the driver information center.
- ABS warning light illuminated.
- Traction control system may be disabled.
- Steering wheel may feel loose or unresponsive.
- Vehicle may exhibit unstable handling characteristics.
Causes of the c0475 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code C0475 include issues with the exhaust valve control solenoid circuit.
- C0475 can be caused by a Faulty Electric Power Steering Motor.
- An open or shorted Electric Power Steering Motor harness.
- A poor electrical connection in the Electric Power Steering Motor circuit.
- A Faulty Power Steering Control Module.
Fixing Error Code c0475 Step By Step
Replace the Exhaust Brake Control Relay with a new one to address fault code C0475.
- To fix OBDII code C0475, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the condition of the steering wheel position sensor and its wiring.
- Test the sensor’s output signal using a multimeter to ensure it is within specifications.
- If the sensor is faulty, replace it with a new one.
- Clear the fault codes using a scan tool and test drive the vehicle to verify the repair.
Cost Of Fixing c0475 Fault Code
Diagnosing and repairing fault code C0475 typically involves inspecting and possibly replacing the Exhaust Pressure Control Valve.
The cost to diagnose and fix OBD code C0475 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour.
The total cost will vary based on shop rates, complexity of the issue, and any additional parts needed for the repair.
Details of the c0475 OBD Code
Code C0475 relates to a problem with the exhaust brake control circuit in the vehicle.
OBD code C0475 means Steering Position Sensor Circuit Malfunction.
This code is triggered by the Electronic Brake Control Module (EBCM) when it detects a circuit malfunction in the steering position sensor.
The steering position sensor is part of the electronic power steering system and is responsible for providing input to the EBCM regarding the position of the steering wheel.
When a malfunction is detected in this circuit, the C0475 trouble code is set, indicating a problem with the steering position sensor circuit.
Mechanic’s Tech Notes
Code C0475 indicates a problem with the exhaust brake control circuit in the vehicle’s brake system.
To diagnose and fix OBDII code C0475, start by checking the transmission control module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.
This thorough inspection can help identify and address any issues causing the C0475 fault code.
FAQ
OBD code C0475 indicates an issue with the Electric Power Steering Motor. Check for faults in the motor, harness, connections, or Power Steering Control Module.
Common symptoms of OBD code C0475 include Engine Light ON, caused by issues like a faulty Electric Power Steering Motor or related wiring problems.
Diagnose and repair OBD code C0475 by checking for a faulty electric power steering motor, harness issues, or a faulty power steering control module. Inspect wiring and connectors for damage.
Wrap Up
If your ABS warning light is on and you see OBDII code C0475, it may indicate a malfunction in the Electronic Brake Control Module (EBCM) motor circuit.
This could be caused by a faulty EBCM motor, damaged wiring, or poor connections.
To address OBDII code C0475, check the wiring harness for any signs of damage or corrosion.
Inspect the EBCM motor connector for proper connection and any visible issues.
Consider testing the EBCM motor and replacing it if necessary to resolve the circuit fault.
