The OBD code C039E indicates a problem with the Transfer Case Motor in the Two/Four Wheel Drive Actuator system.
Symptoms include the Engine Light being ON.
This issue can be caused by a faulty Transfer Case Motor, open/shorted harness, poor electrical connection, or a faulty Transfer Case Control Module.
It is important to address this problem promptly to avoid potential drivability issues.
A possible fix is to inspect and repair any damaged components, wiring harness, or connectors related to the Transfer Case Motor system.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the c039e OBD Code
The vehicle displays a warning light indicating an issue with the c039e fault code.
- Symptoms: Service StabiliTrak warning light may illuminate.
- Reduced engine power message on the driver information center.
- Rough or hesitant acceleration.
- Engine stalling at idle or low speeds.
- Difficulty maintaining speed while driving.
Causes of the c039e OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code c039e include issues with the hybrid powertrain control module.
- C039E can be caused by a faulty Transfer Case Motor (Transfer Case Two/Four Wheel Drive Actuator).
- A Transfer Case Motor harness that is open or shorted.
- A Transfer Case Motor circuit with poor electrical connection.
- A faulty Transfer Case Control Module.
Fixing Error Code c039e Step By Step
To resolve fault code C039E, inspect and repair the wiring harness for any damage or corrosion.
- To fix OBDII code C039E, first, review the possible causes related to this code.
- Visually examine the wiring harness and connectors associated with the ABS system.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no visible issues are found, perform a diagnostic scan tool test to pinpoint the exact cause of the fault.
- Based on the scan results, replace any faulty ABS components such as sensors, modules, or wiring as necessary.
- Clear the fault codes from the vehicle’s computer using the diagnostic tool.
- Finally, test drive the vehicle to ensure the issue has been resolved.
Cost Of Fixing c039e Fault Code
Diagnosing and repairing fault code c039e may require inspection of the vehicle’s steering system components.
The cost to diagnose and fix OBD code C039E is influenced by the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, affecting the total cost.
Other factors like shop rates and the complexity of the repair can also impact the final price.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the c039e OBD Code
Code C039E indicates an issue with the suspension system on a vehicle.
OBD code C039E means Steering Angle Sensor Circuit Range/Performance on some vehicles.
This code is triggered by the Body Control Module (BCM) when it detects that the steering angle sensor’s signal is out of the expected range or not performing within specified parameters.
The steering angle sensor is a critical component of the vehicle’s stability control system, providing data on the steering wheel position and rate of turn to help enhance vehicle stability and safety.
When this sensor malfunctions or sends erratic signals, it can trigger code C039E and potentially affect the vehicle’s stability control system.
Mechanic’s Tech Notes
This code indicates a fault with the torque sensor in the electric power steering system.
OBDII code C039E indicates a problem with the transmission control module (TCM).
To diagnose, check TCM power and ground using a multimeter.
Use a scan tool to confirm TCM communication over the CAN network.
Visually inspect wiring harnesses and connectors for damage, and check connector pins for issues like corrosion or bending.
Reflashing the TCM software may be necessary to resolve the issue.
FAQ
OBD code C039E indicates an issue with the Transfer Case Motor circuit. Check for faults in the motor, harness, connectors, and Control Module. Inspect and repair as needed.
Common symptoms of OBD code C039E include Engine Light ON, caused by issues like a faulty Transfer Case Motor or Control Module. Inspect wiring and connectors for damage.
Diagnose OBD code C039E by checking Transfer Case Motor, harness, and connections. Inspect for damage or corrosion. Repair as needed for proper function.
Wrap Up
If your vehicle is displaying OBDII code c039e along with erratic shifting behavior, it could indicate a fault in the transmission fluid pressure control solenoid circuit.
This may be caused by a faulty transmission fluid pressure control solenoid, damaged wiring harness, or poor electrical connection.
To address OBDII code c039e, start by inspecting the wiring harness and connectors related to the transmission fluid pressure control solenoid.
Look for any signs of damage, corrosion, or loose connections.
Test the solenoid for proper operation and replace if necessary to resolve the issue.
