OBD code C0292 indicates an issue with the Electronic Brake Control Module (EBCM) calibration, a faulty EBCM, or related wiring problems.
Symptoms include the ABS warning light and engine light being illuminated.
The problem can be caused by EBCM calibration, a faulty EBCM, open/shorted harness, or poor electrical connection.
It is a moderate issue that should be addressed promptly.
To fix it, inspect the wiring harness, connectors, and EBCM for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the c0292 OBD Code
The vehicle displays a warning light indicating a steering position sensor circuit malfunction (code C0292).
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Brake pedal may feel different during braking.
- Unusual noises from the ABS system.
Causes of the c0292 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code C0292 include issues with the brake pedal position sensor.
- C0292 can be caused by Electronic Brake Control Module (EBCM) Calibration.
- A Faulty Electronic Brake Control Module (EBCM).
- An open or shorted Electronic Brake Control Module (EBCM) harness.
- Or a poor electrical connection in the Electronic Brake Control Module (EBCM) circuit.
Fixing Error Code c0292 Step By Step
Repair involves inspecting and repairing the brake lamp switch circuit for fault code C0292.
- To fix OBDII code C0292, first, review the possible causes related to this code.
- Visually inspect the wiring harness and connectors associated with the ABS pump motor circuit.
- Check for any damaged components and ensure the connector pins are not broken, bent, pushed out, or corroded.
- If no issues are found during the visual inspection, perform a thorough check of the ABS module and its connections.
- Test the ABS pump motor for proper operation and power supply.
- Replace the ABS module if necessary.
- Finally, clear the fault codes and perform a road test to verify that the issue has been resolved.
Cost Of Fixing c0292 Fault Code
Diagnosing and repairing fault code C0292 may involve inspecting and testing the steering wheel position sensor.
The cost to diagnose and fix OBD code C0292 is based on an estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and the complexity of the repair can influence the final cost.
Details of the c0292 OBD Code
C0292 code indicates a problem with the brake booster pressure sensor circuit.
OBD code C0292 means that there is a problem with the brake pedal position sensor circuit.
This code is triggered by the body control module (BCM) when it detects an issue with the brake pedal position sensor signal.
The brake pedal position sensor is responsible for sending the BCM information about the position of the brake pedal, which is crucial for various vehicle systems such as traction control, stability control, and cruise control.
Mechanic’s Tech Notes
Code C0292 indicates a fault in the brake pedal position sensor circuit.
To diagnose and fix OBDII code C0292, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection will help identify and address any issues causing the C0292 fault code.
FAQ
OBD code C0292 indicates an issue with the Electronic Brake Control Module (EBCM) calibration, faulty EBCM, or related wiring harness/connection problems.
Common symptoms for OBD code C0292 include ABS warning light on, engine light on. Causes may be EBCM calibration, faulty EBCM, or wiring issues. Fix: Inspect and repair wiring connections.
Diagnose and repair OBD code C0292 by checking EBCM calibration, inspecting EBCM and harness for issues, and examining wiring connectors for damage or corrosion.
Wrap Up
If your ABS warning light is illuminated and you retrieve OBDII code c0292, it may indicate a fault in the brake pressure sensor circuit.
This could be caused by a damaged sensor, faulty wiring, or poor connections in the ABS system.
To address OBDII code c0292, start by inspecting the wiring harness and connectors related to the brake pressure sensor.
Look for any signs of damage, corrosion, or loose connections.
Test the sensor for proper operation and replace it if necessary to resolve the issue.
