OBD code C0267 indicates a fault with the Brake Fluid Level Switch circuit in the Electronic Brake Control Module (EBCM).
Symptoms include the ABS Warning Light and Engine Light being illuminated.
The issue is commonly caused by a faulty switch or wiring problems.
It is crucial to address promptly to ensure proper brake system functionality.
A possible fix involves inspecting and repairing the wiring and connectors related to the Brake Fluid Level Switch.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the c0267 OBD Code
The vehicle may exhibit issues with the pump motor circuit for fault code C0267.
- With OBD code C0267, the AntiLock Brake System (ABS) Warning Light may be ON.
- The Engine Light (or Service Engine Soon Warning Light) may also be illuminated.
- The vehicle may experience erratic ABS system behavior.
- The ABS system may not function properly during braking.
- The vehicle may exhibit unusual braking patterns or noises.
Causes of the c0267 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code C0267 include issues with the motor control circuitry.
- C0267 can be caused by a faulty Brake Fluid Level Switch.
- A Brake Fluid Level Switch harness that is open or shorted.
- A Brake Fluid Level Switch circuit with poor electrical connection.
- A faulty Electronic Brake Control Module (EBCM).
Fixing Error Code c0267 Step By Step
Repair the open or short circuit in the motor control circuit of the pump motor.
- To fix OBDII code C0267, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the ABS pump motor circuit.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the ABS pump motor for proper operation and power supply.
- Replace the ABS pump motor if it is faulty.
- Clear the fault codes and perform a road test to verify the repair.
Cost Of Fixing c0267 Fault Code
Repairing fault code C0267 typically involves replacing the pump motor circuit in the ABS module.
The cost to diagnose and fix OBD code C0267 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
Costs depend on labor rates, shop location, and the complexity of the repair needed.
Details of the c0267 OBD Code
C0267 pertains to a problem with the pump motor circuit in the ABS module.
OBD code C0267 means that the Excessive Dump/Isolation Time of the Pump Motor Relay circuit has been detected.
This code is triggered by the Electronic Brake Control Module (EBCM) based on the feedback it receives from the pump motor relay circuit.
The EBCM monitors the pump motor relay circuit to ensure proper operation of the ABS system.
If the dump/isolation time is outside of the expected range, the C0267 code is set, indicating a potential issue with the ABS pump motor relay circuit.
Mechanic’s Tech Notes
Code C0267 relates to a problem with the pump motor circuit in the ABS module.
OBDII code C0267 indicates a fault with the TCM actuator supply voltage low.
To diagnose, use a voltmeter to check the TCM power and ground circuits for proper voltage levels.
Utilize a scan tool to confirm TCM communication over the CAN network.
Visually inspect wiring harnesses and connectors for any damage, and ensure connector pins are not broken, bent, or corroded.
If no visible issues are found, consider reprogramming the TCM.
FAQ
OBD code C0267 indicates an issue with the Brake Fluid Level Switch circuit. Check switch, wiring, and connectors for faults or poor connections.
Common symptoms for OBD code C0267 include ABS warning light on, engine light on. Causes may be faulty brake fluid level switch or EBCM. Inspect wiring and connectors for issues.
Diagnose OBD code C0267 by checking the brake fluid level switch and its wiring for faults. Inspect connectors for damage or corrosion.
Wrap Up
If your ABS warning light is on and you’re seeing OBDII code c0267, it may be caused by a malfunction in the pump motor circuit of the Electronic Brake Control Module (EBCM).
This could be due to a faulty EBCM, damaged wiring, or poor connections.
To address OBDII code c0267, start by inspecting the wiring harness and connectors for any signs of damage or corrosion.
Test the connections for proper continuity and resistance.
If no issues are found, consider replacing the Electronic Brake Control Module (EBCM) to resolve the problem.
