OBD code C0245 indicates a fault in the Electronic Brake Control Module (EBCM) system.
Symptoms include the AntiLock Brake System (ABS) and Engine warning lights being illuminated.
This issue is commonly caused by missized or nonmatching brand tires, a faulty EBCM, open/shorted EBCM harness, or poor electrical connections.
It is a serious problem that requires immediate attention.
To fix it, inspect the wiring harness, connectors, and components for any damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the c0245 OBD Code
The vehicle displays an issue related to the wheel speed sensor circuit malfunction (C0245).
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Strange noises coming from the ABS system.
- Difficulty braking in certain conditions.
Causes of the c0245 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code C0245 include issues with the antilock brake system.
- C0245 can be caused by missized or nonmatching brand tire.
- A faulty Electronic Brake Control Module (EBCM).
- An Electronic Brake Control Module harness that is open or shorted.
- An Electronic Brake Control Module circuit with a poor electrical connection.
Fixing Error Code c0245 Step By Step
Repairing fault code C0245 involves addressing issues with the AntiLock Brake System (ABS) pump motor circuit.
- To fix OBDII code C0245, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the condition of the wheel speed sensor wiring and connectors for any issues.
- Test the wheel speed sensor for proper operation and replace if necessary.
- Clear the fault codes from the vehicle’s computer using a scan tool.
- Finally, test drive the vehicle to verify that the code does not return, indicating a successful repair.
Cost Of Fixing c0245 Fault Code
Diagnosing and repairing fault code C0245 typically involves inspecting and possibly replacing the wheel speed sensor.
The cost to diagnose and fix OBD code C0245 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
The total cost depends on labor rates, shop fees, and the complexity of the repair needed.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the c0245 OBD Code
C0245 pertains to an issue with the AntiLock Brake System (ABS) Pump Motor Control Circuit.
OBD code C0245 means Wheel Speed Sensor Frequency Error.
This code is triggered by the Electronic Brake Control Module (EBCM) when it detects a discrepancy in the frequency signal from one of the wheel speed sensors.
The wheel speed sensors are part of the Antilock Braking System (ABS) and are responsible for monitoring the speed of each wheel to help prevent wheel lockup during braking.
When the EBCM detects a frequency error from a wheel speed sensor, it will trigger code C0245 to indicate a potential issue with the ABS system.
Mechanic’s Tech Notes
Code C0245 indicates a malfunction in the ABS hydraulic pump motor circuit.
OBDII code C0245 indicates a fault with the AntiLock Brake System (ABS) Traction Control Module (TCM) Brake Switch Circuit.
To diagnose, use a voltmeter to check TCM power and ground.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
Inspect the wiring harness and connectors for damage, corrosion, or loose connections.
Ensure connector pins are intact.
Reflash the TCM if needed.
This process helps identify and address issues related to the brake switch circuit, aiding in resolving the C0245 fault code.
FAQ
OBD code C0245 indicates Electronic Brake Control Module (EBCM) issues. Symptoms include ABS and Engine warning lights. Check tires, EBCM, harness, and connections for faults.
Common symptoms for OBD code C0245 include ABS warning light on, engine light on. Possible causes: missized tires, faulty EBCM, wiring issues. Fix: inspect wiring and connectors for damage.
Diagnose OBD code C0245 by checking for missized tires, faulty EBCM, or wiring issues. Inspect harness, connectors, and components for damage or corrosion.
Wrap Up
If your ABS light is on and you see OBDII code c0245, it may indicate a malfunction in the ABS wheel speed sensor circuit for the right front wheel.
This could be caused by a faulty ABS wheel speed sensor, damaged wiring, or poor connections.
To address OBDII code c0245, start by inspecting the wiring harness and connectors related to the ABS wheel speed sensor on the right front wheel.
Look for any signs of damage, corrosion, or loose connections.
Test the ABS wheel speed sensor for proper operation and replace if necessary.
