OBD code C0200 indicates a fault with the Right Front Speed Sensor in the AntiLock Brake System (ABS).
Symptoms include the ABS warning light and engine light being illuminated.
Common causes are a faulty sensor, wiring issues, poor electrical connections, or problems with the brake actuator.
This issue should be addressed promptly to ensure safe braking operation.
A possible fix involves inspecting and repairing the sensor, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the c0200 OBD Code
The vehicle displays an ABS warning light on the dashboard with fault code C0200 stored.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Unusual noises from the ABS system.
- Difficulty braking in certain conditions.
Causes of the c0200 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for fault code C0200 include issues with the ABS wheel speed sensor circuit.
- C0200 can be caused by a Faulty Right Front Speed Sensor.
- A Right Front Speed Sensor harness that is open or shorted.
- A poor electrical connection in the Right Front Speed Sensor circuit.
- A faulty Right Front Speed Sensor rotor.
- Incorrect Sensor installation.
- A malfunctioning Brake actuator (skid control ECU).
Fixing Error Code c0200 Step By Step
Repair involves inspecting and repairing the ABS pump motor circuit for fault code C0200.
- To fix OBDII code C0200, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the ABS control module.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the ABS control module for proper operation and communication.
- Replace the ABS control module if necessary.
- Clear the fault codes and perform a road test to verify that the issue has been resolved.
Cost Of Fixing c0200 Fault Code
Diagnosing and repairing fault code C0200 typically involves inspecting and servicing the vehicle’s ABS system.
The cost to diagnose and fix OBD code C0200 depends on the estimated 1. 0hour repair time.
Labor rates range from $75 to $150 per hour.
The total cost will vary based on shop rates, complexity of the issue, and any additional parts or services needed.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the c0200 OBD Code
C0200 code indicates a communication error between the ABS module and the wheel speed sensors.
OBD code C0200 indicates a problem with the ABS Pump Motor Control Circuit.
This code is triggered by the ABS control module when it detects a malfunction in the circuit that controls the ABS pump motor.
The ABS pump motor is responsible for building hydraulic pressure in the ABS system to assist with braking.
When this circuit malfunctions, it can affect the operation of the ABS system, potentially leading to issues with braking performance and stability.
Mechanic’s Tech Notes
Code C0200 indicates a communication error between the ABS module and the ECM.
OBDII code C0200 indicates a communication issue with the ABS Control Module.
To diagnose, check the power and ground to the ABS module using a voltmeter.
Use a scan tool to confirm communication over the CAN network.
Inspect wiring harnesses and connectors for damage, corrosion, or loose connections.
Ensure connector pins are intact.
Reflashing the ABS module may be necessary.
If the issue persists, consider replacing the ABS module.
FAQ
OBD code C0200 indicates an issue with the right front speed sensor in the vehicle’s AntiLock Brake System (ABS). Check sensor, wiring, and connections for faults.
Common symptoms of OBD code C0200 include ABS warning light on, engine light on. Causes may be faulty right front speed sensor or related wiring issues. Fix: Inspect and repair as needed.
Diagnose and repair OBD code C0200 by checking the right front speed sensor, harness, and connections for faults. Inspect wiring for damage or poor connections.
Wrap Up
If your ABS warning light is illuminated and you’re seeing OBDII code C0200, it may indicate a fault in the right front wheel speed sensor circuit.
This could be caused by a damaged wheel speed sensor, faulty wiring connections, or a problem with the ABS module.
To address OBDII code C0200, start by inspecting the wiring harness and connectors leading to the right front wheel speed sensor.
Look for any signs of damage, corrosion, or loose connections.
Test the sensor itself for proper operation and replace if necessary.
