[SOLVED] C0095 Code: Fast Fix For Rear Abs Solenoid

OBD code C0095 indicates a fault with the Right Rear ABS Solenoid 2 in the vehicle’s AntiLock Braking System (ABS).

Symptoms include the Engine Light being ON.

The issue is commonly caused by a faulty solenoid, open/shorted harness, or poor electrical connection.

While not a severe problem, it can affect braking performance.

To fix, inspect and repair any damaged components or wiring connections related to the Right Rear ABS Solenoid 2.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Symptoms of the c0095 OBD Code

The vehicle displays an issue related to the specific fault code C0095.

Symptoms: Service StabiliTrak warning light may illuminate.
Loss of communication with the brake control module.
Steering wheel may feel heavier than usual.
Brake pedal may feel different when applying brakes.

Causes of the c0095 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible triggers for fault code C0095 include issues with the steering angle sensor or its circuit.

C0095 can be caused by a faulty Right Rear ABS Solenoid 2.
A Right Rear ABS Solenoid 2 harness that is open or shorted.
A Right Rear ABS Solenoid 2 circuit with a poor electrical connection.

Fixing Error Code c0095 Step By Step

Repair the steering angle sensor circuit to address fault code C0095.

To fix OBDII code C0095, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the ABS module.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
If any issues are found, repair or replace the damaged wiring or connectors as necessary.
Clear the fault code using a scan tool and test drive the vehicle to verify that the code does not return.
If the code persists, further diagnostics may be required to pinpoint the exact cause of the issue.

Cost Of Fixing c0095 Fault Code

Diagnosing and repairing fault code C0095 may involve inspecting and servicing the steering angle sensor system.

The cost to diagnose and fix OBD code C0095 depends on the estimated 1. 0hour repair time.

Labor rates usually range from $75 to $150 per hour, so the general cost could be between $75 and $150. The final cost may vary based on shop rates, complexity of the issue, and any additional parts needed for the repair.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the c0095 OBD Code

Code C0095 indicates a problem with the right rear wheel speed sensor circuit.

OBD code C0095 means Right Front ABS Channel Out of Range.

This code is triggered by the Electronic Brake Control Module (EBCM) when it detects that the signal from the right front wheel speed sensor is not within the expected range.

This code is related to the AntiLock Braking System (ABS) and indicates a potential issue with the right front wheel speed sensor or its circuit.

Mechanic’s Tech Notes

Code C0095 indicates a fault in the right rear wheel speed sensor circuit.

OBDII code C0095 typically indicates a problem with the Electronic Brake Control Module (EBCM).

To diagnose this, use a voltmeter to check power and ground connections to the EBCM.

Utilize a scan tool to communicate with the EBCM and verify its functionality over the CAN network.

If the wiring harness or connectors appear visually damaged, inspect them closely for issues like broken, bent, or corroded pins.

Reflashing the EBCM may be necessary to resolve the fault.

FAQ

1. What does OBD code C0095 indicate in a vehicle?

OBD code C0095 indicates an issue with the Right Rear ABS Solenoid 2. Check wiring harness, connectors, and components for damage or poor connection.

2. What are the common symptoms associated with OBD code C0095?

Common symptoms of OBD code C0095 include Engine Light ON, caused by issues with the Right Rear ABS Solenoid 2 circuit. Inspect and repair related components as needed.

3. How can I diagnose and repair OBD code C0095 in my vehicle?

Diagnose and repair OBD code C0095 by checking the Right Rear ABS Solenoid 2 and its harness for faults. Inspect wiring and connectors for damage or poor connections.

Wrap Up

If your ABS warning light is illuminated and you retrieve OBDII code c0095, it may indicate a fault in the brake pressure sensor circuit.

This could be caused by a damaged sensor, faulty wiring, or poor connections in the system.

To address OBDII code c0095, start by inspecting the wiring harness and connectors related to the brake pressure sensor.

Look for any signs of damage, corrosion, or loose connections.

Test the sensor for proper operation and replace it if necessary to resolve the issue.