The OBD code C008E indicates a fault in the Active Cruise Control (ACC) Module.
Symptoms include the AntiLock Brake System (ABS) Warning Light and Engine Light being ON.
This issue is commonly caused by a faulty ACC Module or related wiring harness issues.
It is important to visually inspect the wiring harness and connectors for any damage or poor connections to resolve this problem effectively.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the c008e OBD Code
The vehicle displays a warning light indicating a communication error with the brake pedal position sensor.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible symptoms include issues with the vehicle’s stability control system.
- Braking performance may be affected.
- It’s important to address this issue promptly to ensure safe driving conditions.
Causes of the c008e OBD Code
Possible triggers for fault code c008e include faulty wheel speed sensor or damaged wiring.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- C008E can be caused by a faulty Active Cruise Control (ACC) Module.
- A malfunctioning Active Cruise Control (ACC) Module harness that is open or shorted.
- A poor electrical connection in the Active Cruise Control (ACC) Module circuit.
Fixing Error Code c008e Step By Step
Address the faulty communication between the brake pedal position sensor and the control module.
- To fix OBDII code C008E, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the ABS module.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the ABS module for proper operation and communication.
- Reset the ABS module if necessary.
- Consider replacing the ABS module if all other steps do not resolve the issue.
Cost Of Fixing c008e Fault Code
Diagnosing and repairing fault code C008E may involve inspecting and replacing the ABS control module.
The cost to diagnose and fix OBD code C008E depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity of the issue can affect the final cost.
Details of the c008e OBD Code
Code C008E relates to a fault in the brake pedal position sensor circuit.
OBD code C008E indicates an issue with the steering angle sensor.
This code is triggered by the Electronic Brake Control Module (EBCM) when it detects a fault in the steering angle sensor signal or system.
The steering angle sensor is responsible for providing the EBCM with information about the steering wheel position and angle, which is crucial for stability control systems and other safety features in the vehicle.
Mechanic’s Tech Notes
Code c008e indicates a fault in the brake pedal position sensor circuit.
To diagnose and fix OBDII code C008E, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.
This thorough inspection can help identify and address any issues causing the C008E fault code.
FAQ
OBD code C008E indicates a fault with the Active Cruise Control (ACC) Module. Symptoms include ABS and Engine warning lights. Check module, harness, and connections for issues.
Common symptoms of OBD code C008E include ABS warning light and engine light on. Causes may be faulty ACC module or related wiring issues. Fix involves inspecting and repairing wiring connections.
Diagnose OBD code C008E by checking ACC module and harness for faults. Inspect wiring for damage or poor connections. Repair as needed.
Wrap Up
If your vehicle is displaying OBD code c008e along with ABS warning lights, it may indicate a fault in the brake pressure sensor circuit, a malfunctioning brake pressure sensor, or issues with the ABS module.
This could lead to inaccurate brake pressure readings and affect the ABS system’s performance.
To address OBD code c008e, start by inspecting the wiring harness and connectors related to the brake pressure sensor.
Check for any signs of damage, corrosion, or loose connections.
Test the brake pressure sensor for proper operation and consider replacing it if necessary.
Additionally, ensure the ABS module is functioning
