OBD code C0070 indicates a fault with the Right Front ABS Solenoid in the AntiLock Brake System (ABS).
Symptoms include the ABS warning light and engine light being illuminated.
The issue may stem from a faulty solenoid, open/shorted harness, or poor electrical connection.
This is a moderate issue that should be addressed promptly.
To fix it, inspect the solenoid, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the c0070 OBD Code
The vehicle displays an issue related to the steering angle sensor.
- Symptoms for OBD code C0070 include: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Unusual noises coming from the ABS system.
- Difficulty braking in certain conditions.
Causes of the c0070 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible issues with the steering angle sensor can trigger fault code C0070.
- C0070 can be caused by a faulty Right Front ABS Solenoid.
- A Right Front ABS Solenoid harness that is open or shorted.
- A Right Front ABS Solenoid circuit with a poor electrical connection.
Fixing Error Code c0070 Step By Step
Replace the steering angle sensor to address fault code C0070.
- To fix OBDII code C0070, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the steering angle sensor circuit.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If any issues are found during the inspection, repair or replace the damaged wiring or connectors as necessary.
- Clear the fault codes from the vehicle’s computer using a scan tool.
- Test drive the vehicle to see if the code returns.
- If the code persists, consider replacing the steering angle sensor itself.
Cost Of Fixing c0070 Fault Code
Diagnosing and repairing fault code C0070 may involve inspecting and servicing the vehicle’s steering angle sensor system.
The cost to diagnose and fix OBD code C0070 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
Costs depend on labor rates, shop location, and the complexity of the repair needed.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the c0070 OBD Code
Code C0070 indicates a malfunction in the steering angle sensor circuit.
OBD code C0070 means Left Front Wheel Speed Sensor Circuit.
This code is triggered by the Body Control Module (BCM) when it detects a circuit malfunction in the left front wheel speed sensor.
The wheel speed sensor is part of the Antilock Braking System (ABS) and is responsible for monitoring the speed of the left front wheel.
When the sensor circuit malfunctions, it can affect the ABS system’s ability to properly control wheel speed and may result in issues like traction control activation or ABS system engagement during braking.
Mechanic’s Tech Notes
Code C0070 indicates a malfunction in the right rear wheel speed sensor circuit.
To diagnose and fix OBDII code C0070, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection can help identify and resolve issues related to code C0070.
FAQ
OBD code C0070 indicates an issue with the Right Front ABS Solenoid circuit. Check for faults in the solenoid, harness, or electrical connections.
Common symptoms for OBD code C0070 include ABS warning light on, engine light on. Causes may be faulty right front ABS solenoid or related wiring issues. Fix: Inspect and repair as needed.
Diagnose and repair OBD code C0070 by checking the right front ABS solenoid, harness, and connections for faults. Inspect for damage or poor connections.
Wrap Up
If your ABS warning light is on and you see OBDII code c0070, it may indicate a fault with the right rear wheel speed sensor circuit.
This could be caused by a damaged sensor, faulty wiring, or poor connections.
To address OBDII code c0070, start by inspecting the wiring and connector at the right rear wheel speed sensor.
Look for any signs of damage, corrosion, or loose connections.
Test the sensor itself for proper operation and replace if necessary to resolve the issue.
