OBD code C0057 indicates an issue with the Vehicle Dynamics Control (VDC) system.
Symptoms include the AntiLock Brake System (ABS) Warning Light and Engine Light being illuminated.
This can be caused by a faulty VDC module, open or shorted VDC harness, or poor electrical connections.
It is a moderate issue.
To fix, inspect and repair any damaged components, wiring harness, or connectors related to the VDC system.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the c0057 OBD Code
The vehicle displays an ABS warning light on the dashboard.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Braking may feel different or less effective.
- Unusual noises like grinding or scraping during braking.
- The vehicle may pull to one side during braking.
Causes of the c0057 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for fault code C0057 include issues with the steering angle sensor or its circuit.
- C0057 can be caused by a faulty Vehicle Dynamics Control (VDC).
- A Vehicle Dynamics Control (VDC) harness that is open or shorted.
- A Vehicle Dynamics Control (VDC) circuit with a poor electrical connection.
Fixing Error Code c0057 Step By Step
Repair involves inspecting and replacing the wheel speed sensor harness connector for fault code C0057.
- To fix OBDII code C0057, first, review the possible causes related to this code.
- Visually examine the wiring harness and connectors associated with the ABS module.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no visible issues are found, perform a diagnostic scan tool test to pinpoint the exact cause of the C0057 code.
- Based on the scan results, replace the faulty ABS module if necessary.
- Finally, clear the code and test drive the vehicle to ensure the issue has been resolved.
Cost Of Fixing c0057 Fault Code
Diagnosing and repairing fault code C0057 typically involves inspecting and possibly replacing the wheel speed sensor.
The cost to diagnose and fix OBD code C0057 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour.
The total cost will vary based on shop rates, complexity of the issue, and any additional parts or services needed.
Details of the c0057 OBD Code
Code C0057 indicates an issue with the steering angle sensor calibration.
OBD code C0057 means Right Rear Wheel Speed Circuit Malfunction.
This code is triggered by the Electronic Brake Control Module (EBCM) when it detects an issue with the right rear wheel speed sensor circuit.
The EBCM monitors individual wheel speeds to ensure proper operation of the ABS system and traction control.
When a fault is detected in the right rear wheel speed circuit, the C0057 code is set, indicating a malfunction that needs to be diagnosed and repaired.
Mechanic’s Tech Notes
Code C0057 indicates an issue with the steering angle sensor calibration on the vehicle.
OBDII code C0057 typically indicates an issue with the Vehicle Stability Control (VSC) system.
To diagnose this, you can start by checking the power and ground to the Transmission Control Module (TCM) using a multimeter.
Ensure the TCM responds over the Controller Area Network (CAN) network by using a scan tool.
If the wiring harness or connectors are visually inspected and found damaged, repair or replace them as needed.
Additionally, consider reprogramming or reflashing the TCM if necessary to address the fault code.
FAQ
OBD code C0057 indicates a fault in the Vehicle Dynamics Control (VDC) system. Symptoms include ABS and Engine warning lights. Check and repair VDC components and wiring connections.
Common symptoms for OBD code C0057 include ABS warning light on, engine light on, caused by faulty VDC, harness issues. Fix: Inspect wiring, connectors for damage.
Diagnose OBD code C0057 by checking VDC system components for faults. Inspect wiring harness and connectors for damage or poor connections.
Wrap Up
If your ABS warning light is on and you see OBDII code c0057, it may indicate a fault in the rear wheel speed sensor circuit.
This could be caused by a damaged wheel speed sensor, faulty wiring connections, or a corroded sensor harness.
To address OBDII code c0057, start by inspecting the rear wheel speed sensor and its wiring harness for any visible damage.
Test the sensor’s resistance and check for proper voltage supply.
Ensure all connectors are securely attached and free of corrosion or debris.
Replace any faulty components as needed.
