OBD code C0054 indicates a problem with the Steering Wheel Position Sensor in the AntiLock Brake System (ABS).
Symptoms include the ABS Warning Light and Engine Light being illuminated.
This is usually caused by a faulty sensor, open/shorted sensor harness, or poor electrical connection.
It’s a moderate issue that should be addressed promptly.
To fix it, inspect the sensor, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the c0054 OBD Code
The vehicle displays an ABS warning light on the dashboard.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Brake pedal may feel different than usual.
- Unusual noises coming from the ABS system.
Causes of the c0054 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code C0054 include issues with the steering angle sensor or its circuit.
- C0054 can be caused by a faulty Steering Wheel Position Sensor.
- A Steering Wheel Position Sensor harness that is open or shorted.
- A Steering Wheel Position Sensor circuit with poor electrical connection.
Fixing Error Code c0054 Step By Step
Repairing fault code C0054 involves inspecting and potentially replacing the rear wheel speed sensor.
- To fix OBDII code C0054, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Check the wheel speed sensor wiring and connections for any issues.
- Inspect the wheel speed sensor for damage or contamination.
- Clean the sensor mounting surface if necessary.
- Test the wheel speed sensor using a multimeter to ensure proper operation.
- Replace the wheel speed sensor if it fails the test.
- Clear the fault codes with a scan tool and test drive the vehicle to verify the repair.
Cost Of Fixing c0054 Fault Code
Diagnosing and repairing fault code C0054 typically involves inspecting and possibly replacing the rear wheel speed sensor.
The cost to diagnose and fix OBD code C0054 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
Costs depend on labor rates, shop fees, and the complexity of the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the c0054 OBD Code
Code C0054 indicates an issue with the right rear wheel speed sensor circuit.
OBD code C0054 indicates an issue with the right rear wheel speed sensor circuit.
This code is triggered by the Electronic Brake Control Module (EBCM) when it detects a problem with the signal from the right rear wheel speed sensor.
The EBCM uses this sensor to monitor the speed of the right rear wheel for proper ABS and traction control system operation.
If the sensor or its circuit has a fault, the EBCM will set code C0054.
Mechanic’s Tech Notes
Code C0054 indicates an issue with the right rear wheel speed sensor circuit.
OBDII code C0054 typically indicates a problem with the TCM (Transmission Control Module) power circuit.
To diagnose this, use a voltmeter to check TCM power and ground connections for proper voltage and continuity.
Additionally, scan tools can be used to communicate with the TCM over the CAN network to verify its responsiveness.
If the wiring harness or connectors appear visually damaged, inspect them closely for issues like broken, bent, or corroded pins.
Reflashing the TCM may be necessary to resolve the fault.
FAQ
OBD code C0054 indicates an issue with the Steering Wheel Position Sensor. Symptoms include ABS and Engine warning lights. Check sensor, harness, and connections for faults.
Common symptoms for OBD code C0054 include ABS warning light and engine light on. Causes may be faulty steering wheel position sensor or related wiring issues. Fix: Inspect sensor and wiring.
Diagnose and repair OBD code C0054 by checking the steering wheel position sensor and its wiring for faults. Inspect connectors for damage or corrosion.
Wrap Up
If your ABS warning light is on and you see OBDII code c0054, it may indicate a malfunction in the right rear wheel speed sensor circuit.
This could be caused by a faulty wheel speed sensor, damaged wiring, or poor connections at the sensor or module.
To address OBDII code c0054, start by inspecting the wiring and connector at the right rear wheel speed sensor.
Look for any signs of damage, corrosion, or loose connections.
Test the sensor for proper operation and replace it if necessary to resolve the issue.
