OBD code C0041 indicates a fault with the Brake Pedal Switch ‘B’ circuit in the AntiLock Brake System (ABS).
Symptoms include the ABS Warning Light and Engine Light being illuminated.
This issue is commonly caused by a faulty brake pedal switch or related wiring issues.
It is important to address promptly to ensure proper ABS functionality.
A possible fix involves inspecting and repairing the brake pedal switch circuit and related components.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the c0041 OBD Code
The ABS warning light is illuminated on the dashboard with fault code C0041 stored.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Strange noises coming from the ABS system.
- Difficulty braking smoothly.
Causes of the c0041 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for fault code C0041 include issues with the left front wheel speed sensor.
- C0041 can be caused by a faulty Brake Pedal Switch ‘B’.
- A Brake Pedal Switch ‘B’ harness that is open or shorted.
- A Brake Pedal Switch ‘B’ circuit with a poor electrical connection.
Fixing Error Code c0041 Step By Step
Repairing fault code C0041 involves inspecting and potentially replacing the right front wheel speed sensor.
- To fix OBDII code C0041, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, inspect the wheel speed sensor wiring and connectors for any issues.
- Test the wheel speed sensors for proper operation and replace any faulty sensors.
- Clear the fault codes and test drive the vehicle to verify the repair.
- If the issue persists, consider checking the Electronic Brake Control Module (EBCM) for faults and perform any necessary repairs or replacements.
Cost Of Fixing c0041 Fault Code
Diagnosing and repairing fault code C0041 typically involves inspecting and servicing the vehicle’s left front wheel speed sensor.
The cost to diagnose and fix OBD code C0041 typically ranges from $75 to $150 per hour for labor rates.
With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the c0041 OBD Code
C0041 indicates a faulty right front wheel speed sensor circuit malfunction.
OBD code C0041 means Right Front Wheel Speed Sensor Circuit Range/Performance on most vehicles.
This code is triggered by the Electronic Brake Control Module (EBCM) when it detects a discrepancy in the signal from the right front wheel speed sensor.
The system involved is the Antilock Brake System (ABS), which relies on input from wheel speed sensors to determine individual wheel speeds for proper ABS operation.
Mechanic’s Tech Notes
Code C0041 indicates a faulty right front wheel speed sensor circuit.
To diagnose OBDII code C0041, start by checking the ABS module power and ground using a voltmeter.
Verify communication between the ABS module and other modules over the CAN network using a scan tool.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
If no visible issues are found, consider reprogramming or replacing the ABS module.
Remember to clear the code after repairs are made.
FAQ
OBD code C0041 indicates an issue with the Brake Pedal Switch ‘B’. Symptoms include ABS and Engine warning lights. Check wiring and connectors for faults.
Common symptoms for OBD code C0041 include ABS warning light on, engine light on, caused by faulty brake pedal switch ‘B’. Fix: Inspect wiring harness and connectors for damage.
Diagnose and repair OBD code C0041 by checking Brake Pedal Switch ‘B’, its harness, and circuit for faults. Inspect wiring, connectors, and components for damage or corrosion.
Wrap Up
If your ABS warning light is on and you retrieve OBDII code c0041, it may indicate a faulty right front wheel speed sensor circuit.
This could be caused by a damaged sensor, wiring issue, or poor connection.
To address OBDII code c0041, inspect the right front wheel speed sensor and its wiring harness for any visible damage.
Test the sensor’s resistance and check for proper connection at the sensor and ABS module.
Replace the sensor if necessary and ensure all connections are secure.
