The Buick P0446 fault code indicates an issue with the Evaporative Emission Control System.
Symptoms include the Engine Light ON and a fuel odor due to vapor release.
Causes may include a plugged vapor canister, pinched EVAP hose, or faulty Evaporative Emission Vent Solenoid Valve.
While not a critical issue, it can affect emissions.
A possible fix involves inspecting and repairing the mentioned components and wiring connections.
| Repair Importance Level | 3.33 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms for Buick p0446
The vehicle may exhibit a check engine light with a P0446 fault code stored.
- Symptoms: Engine Light ON (or Service Engine Soon Warning Light).
- A noticeable fuel odor may result from fuel vapor release.
Causes for Buick p0446
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Fault code P0446 in a Buick typically indicates a malfunction in the EVAP vent control circuit.
- P0446 can be caused by a plugged vapor canister.
- A pinched or blocked EVAP hose.
- A faulty Evaporative Emission Vent Solenoid Valve.
- An Evaporative Emission Vent Solenoid Valve harness that is open or shorted.
- An Evaporative Emission Vent Solenoid Valve circuit with poor electrical connection.
- Or a faulty Fuel Tank Pressure (FTP) sensor.
Fix for Buick p0446
Replace the faulty EVAP vent valve to address Buick P0446.
- To fix P0446, Review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Check the wiring and connectors related to the EVAP vent solenoid for any damage or corrosion.
- Test the EVAP vent solenoid for proper operation using a scan tool.
- Replace the EVAP vent solenoid if it fails the test.
- Clear the fault codes and perform a drive cycle to ensure the repair was successful.
Description for Buick p0446
Fault code P0446 in a Buick indicates an issue with the EVAP vent control circuit malfunction.
Code P0446 for a Buick indicates an issue with the Evaporative Emission Control System Vent Control Circuit.
This code is triggered by the Engine Control Module (ECM) when it detects that there is a malfunction in the vent control circuit for the evaporative emission system.
The ECM monitors the system to ensure proper operation and emissions compliance.
When it detects a fault in the vent control circuit, it sets code P0446.
This code typically points to a problem with the vent valve or its wiring, causing improper venting of the fuel vapors from the fuel tank.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Tech Notes for Buick p0446
Detailed information on diagnosing and repairing Buick fault code P0446 related to the EVAP system.
When dealing with a Buick P0446 fault code, it typically indicates an issue with the EVAP vent control circuit.
To diagnose this code effectively, you can start by visually inspecting the wiring harness and connectors related to the EVAP system.
Look for any signs of damage, corrosion, or loose connections.
Next, you can use a multimeter to check the voltage at the EVAP vent valve control circuit.
Ensure that there is battery voltage present when the system is activated.
If there is no voltage, you may need to trace the circuit back to find the source of the issue, which could be a faulty relay, fuse, or wiring problem.
Additionally, using a scan tool, you can command the EVAP vent valve to open and close to see if it responds accordingly.
If there is no response, it could indicate a faulty vent valve or a problem with the control module.
In some cases, reprogramming or reflashing the control module may be necessary to resolve the P0446 fault code.
However, it’s crucial to perform a thorough diagnosis before attempting any repairs to ensure an accurate and effective fix.
FAQ
Common causes of P0446 in a Buick include a plugged vapor canister, pinched EVAP hose, faulty vent solenoid valve, or issues with wiring/connectors.
Diagnose P0446 in Buick: Check vapor canister, EVAP hose, Vent Solenoid Valve, FTP sensor. Inspect wiring for damage, connector pins for issues.
To resolve a P0446 code in a Buick, inspect and potentially replace the vapor canister, EVAP hose, Evaporative Emission Vent Solenoid Valve, or related components as needed.
