The Buick C0244 fault code indicates a problem with the Electronic Brake Control Module (EBCM).
Symptoms include the ABS warning light and engine light being illuminated.
Causes may include a faulty EBCM, open or shorted EBCM harness, poor electrical connection, or a faulty Powertrain Control Module (PCM).
This issue should be addressed promptly to ensure safe braking operation.
A possible fix involves inspecting and repairing any damaged wiring or connectors related to the EBCM.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms for Buick c0244
The vehicle displays an illuminated ABS warning light on the dashboard.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- The ABS system may not function properly.
Causes for Buick c0244
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Buick fault code C0244 include issues with the wheel speed sensor circuit.
- C0244 can be caused by a faulty Electronic Brake Control Module (EBCM).
- A malfunctioning Electronic Brake Control Module (EBCM) harness that is open or shorted.
- An Electronic Brake Control Module (EBCM) circuit with poor electrical connection.
- A faulty Powertrain Control Module (PCM).
Fix for Buick c0244
Repair involves diagnosing and addressing issues with the Electronic Brake Control Module (EBCM) circuit.
- To fix C0244, Review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Check the wiring going to the EBCM for any damage or corrosion.
- Inspect the wheel speed sensor wiring for any issues.
- Test the wheel speed sensors for proper operation.
- Replace any faulty wheel speed sensors or repair damaged wiring as necessary.
- Clear the fault codes and perform a test drive to verify the repair.
Description for Buick c0244
C0244 pertains to the steering wheel position sensor signal being erratic.
Code C0244 for a Buick indicates a fault with the Electronic Brake Control Module (EBCM) motor relay circuit.
This code is triggered by the EBCM when it detects an issue with the motor relay circuit, which is responsible for controlling the operation of the ABS system.
The ABS system helps prevent wheel lockup during braking by modulating brake pressure to the wheels.
When this code is set, it typically points to a problem with the EBCM motor relay circuit, which may require further diagnosis to pinpoint the exact cause of the fault.
Tech Notes for Buick c0244
For Buick fault code C0244, check for issues with the wheel speed sensor circuit.
Fault code C0244 in a Buick typically indicates a fault with the Electronic Brake Control Module (EBCM) or the Transmission Control Module (TCM) communication circuit.
To diagnose and fix this issue, you can follow these steps: Visual Inspection: Start by visually inspecting the wiring harness and connectors related to the EBCM and TCM.
Look for any signs of damage, corrosion, or loose connections.
Ensure connector pins are not broken, bent, or pushed out.
Check Power and Ground: Using a multimeter, check the power and ground connections to the TCM.
Ensure that the TCM is receiving proper voltage and ground for operation.
Scan Tool Diagnostics: Use a scan tool to communicate with the TCM and EBCM.
Verify if the TCM responds over the Controller Area Network (CAN) network.
If there is no response, it could indicate a communication issue between the modules.
Reflashing: In some cases, reprogramming or reflashing the TCM may be necessary to resolve communication errors between modules.
Consult the manufacturer’s technical service bulletins for any specific reprogramming procedures related to this fault code.
By following these diagnostic steps, you can pinpoint the
FAQ
Fault code C0244 in a Buick indicates an issue with the Electronic Brake Control Module (EBCM). Check EBCM, harness, and connectors for faults.
Diagnose C0244 by checking EBCM for faults. Inspect wiring for damage or poor connections. Verify PCM functionality. Review and visually inspect harness and connectors.
For fault code C0244 in a Buick, common fixes include checking EBCM, harness, and connectors for faults. Inspect for damage, corrosion, or poor connections.
