The OBD code P0113 for BMW indicates an issue with the Intake Air Temperature (IAT) sensor circuit.
Symptoms include the Engine Light being ON.
Common causes are a faulty IAT sensor, dirty air filter, or wiring harness issues.
It’s not a severe issue but can affect engine performance.
To fix, inspect the sensor, air filter, and wiring for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Bmw p0113 OBD Code
The vehicle may experience issues related to the intake air temperature sensor circuit malfunction (BMW P0113).
- Symptoms: Engine Light ON.
- Possible lack of power during acceleration.
- Engine may run rough or stall at idle.
Causes of the Bmw p0113 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for BMW fault code P0113 include issues with the intake air temperature sensor circuit.
- P0113 can be caused by a faulty Intake Air Temperature (IAT) sensor.
- A dirty air filter.
- An open or shorted Intake Air Temperature (IAT) sensor harness.
- A poor electrical connection in the Intake Air Temperature (IAT) sensor circuit.
Fixing Bmw Error Code p0113 Step By Step
Replace faulty intake air temperature sensor on BMW with fault code P0113.
- To fix the BMW OBDII code P0113, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the intake air temperature (IAT) sensor for proper operation and connection.
- Test the IAT sensor using a multimeter to verify its resistance values.
- If the sensor is faulty, replace it with a new one.
- Clear the fault code using an OBDII scanner and test drive the vehicle to ensure the code does not return.
Cost Of Fixing Bmw p0113 Fault Code
The repair for BMW fault code P0113 typically involves diagnosing and replacing the intake air temperature sensor.
The cost to diagnose and fix a BMW OBD code P0113 typically ranges from $75 to $150 per hour for labor rates.
With an estimated repair time of 1. 0 hour, the total cost could be around $75 to $150, depending on shop rates and the complexity of the issue.
Details of the Bmw p0113 OBD Code
BMW fault code P0113 relates to an issue with the intake air temperature sensor circuit.
Code P0113 for BMW indicates an issue with the Intake Air Temperature (IAT) sensor circuit.
This code is triggered when the ECM detects a high voltage signal from the IAT sensor, indicating a problem with the sensor or its circuit.
The IAT sensor is responsible for measuring the temperature of the incoming air to the engine, helping the ECM adjust fuel delivery and ignition timing for optimal performance.
Mechanic’s Tech Notes
Detailed information on BMW fault code P0113, including symptoms, causes, and troubleshooting steps.
OBDII code P0113 for BMW indicates an issue with the intake air temperature sensor circuit.
To diagnose, use a multimeter to test the sensor’s resistance and voltage.
Check the wiring harness and connectors for damage or corrosion.
Ensure the sensor is receiving power and ground.
A scan tool can help monitor sensor data and confirm proper readings.
If all checks out, consider replacing the intake air temperature sensor.
Reflashing the engine control module may also be necessary for proper operation.
FAQ
OBD code P0113 in a BMW means the Intake Air Temperature (IAT) sensor circuit is high. Check sensor, air filter, wiring, and connectors for issues.
Common causes of OBD code P0113 in a BMW include a faulty Intake Air Temperature (IAT) sensor, dirty air filter, or issues with the sensor circuit.
Diagnose and fix OBD code P0113 in your BMW by checking the IAT sensor, air filter, and wiring. Inspect for damage or poor connections.
Wrap Up
If your BMW is displaying OBD code P0113 along with poor engine performance and high fuel consumption, it may indicate a faulty Intake Air Temperature (IAT) sensor, damaged wiring in the IAT sensor circuit, or a problem with the sensor connector.
To address BMW OBD code P0113, start by inspecting the IAT sensor and its wiring harness for any signs of damage or corrosion.
Test the sensor’s resistance and ensure proper connection at the sensor and ECU.
Replace the sensor if necessary to restore accurate temperature readings and engine performance.
