The OBD code P0030 for BMW indicates an issue with the Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit.
Symptoms include the Engine Light being ON.
This code is commonly caused by a faulty sensor, fuse, wiring issues, or a malfunctioning Engine Control Module (ECM).
It is important to address promptly to prevent potential performance issues.
A possible fix involves inspecting and repairing any damaged wiring or connectors related to the sensor circuit.
Repair Importance Level | 6.67 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Bmw p0030 OBD Code
The vehicle may experience poor engine performance and increased fuel consumption with fault code BMW P0030.
- Symptoms: Engine Light ON.
- Possible lack of power during acceleration.
- Rough idle.
Causes of the Bmw p0030 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for BMW fault code P0030 include issues with the oxygen sensor heater circuit in bank 1 sensor 1.
- P0030 can be caused by a faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit.
- A blown Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit fuse.
- An open or shorted Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit to ground.
- A poor electrical connection in the Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit.
- A faulty Engine Control Module (ECM).
Fixing Bmw Error Code p0030 Step By Step
Address the issue by inspecting the oxygen sensor heater circuit in BMW with fault code P0030.
- To fix BMW OBDII code P0030, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the wiring going to the oxygen sensor heater circuit for any breaks or shorts.
- Test the oxygen sensor heater circuit for proper resistance and continuity.
- Replace the oxygen sensor if the heater circuit is faulty.
- Clear the fault codes and perform a test drive to verify the repair.
Cost Of Fixing Bmw p0030 Fault Code
The repair for BMW fault code P0030 typically involves replacing the oxygen sensor.
The cost to diagnose and fix the BMW OBD code P0030 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the general cost could be between $75 and $150. Actual cost may vary based on shop rates and the complexity of the repair.
Details of the Bmw p0030 OBD Code
BMW fault code P0030 relates to an issue with the oxygen sensor heater control circuit in bank 1.
Code P0030 for BMW vehicles indicates an issue with the heated oxygen sensor (HO2S) heater control circuit in bank 1 sensor 1. This sensor is located in the exhaust system before the catalytic converter.
The ECM triggers this code when it detects a problem with the heater circuit of the oxygen sensor, which is responsible for quickly bringing the sensor up to operating temperature for accurate readings.
The signal or system involved is the HO2S heater control circuit in bank 1 sensor 1.
Mechanic’s Tech Notes
This section provides detailed information on diagnosing and fixing BMW fault code P0030.
OBDII code P0030 for BMW indicates an issue with the heated oxygen sensor (HO2S) heater control circuit.
To diagnose, use a multimeter to test the HO2S heater circuit for proper voltage and continuity.
Check the wiring harness and connectors for any damage, corrosion, or poor connections.
Ensure the HO2S heater fuse is intact.
Scan tools can help monitor sensor data and confirm proper sensor operation.
If the sensor heater is faulty, replacement is necessary.
Reflash the engine control module if needed.
Regular maintenance can prevent future sensor failures.
FAQ
OBD code P0030 in a BMW means an issue with Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit. Check sensor, fuse, wiring, connectors for faults.
Common causes of OBD code P0030 in a BMW include a faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit or issues with related components.
Diagnose and fix OBD code P0030 in your BMW by checking the wiring harness, connectors, and H2OS Bank 1 Sensor 1 circuit for faults.

Wrap Up
If your BMW is displaying OBD code P0030, you may experience poor engine performance, rough idling, or decreased fuel efficiency.
This code typically indicates a malfunction in the heated oxygen sensor (HO2S) circuit for Bank 1 Sensor 1. Possible causes include a faulty HO2S, damaged wiring, or a poor electrical connection.
To address BMW OBD code P0030, begin by inspecting the wiring harness and connectors for any signs of damage or corrosion.
Test the HO2S heater element for proper resistance and check the sensor’s electrical connections for tightness and cleanliness