The OBD code B396D indicates a problem with the Liftgate Control SwitchInterior in the vehicle.
Symptoms include the Engine Light being ON.
This issue can be caused by a faulty switch, open/shorted harness, poor electrical connection, or a faulty Liftgate Control Module.
It is important to address this problem promptly to avoid potential liftgate operation issues.
To fix it, inspect the switch, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the b396d OBD Code
The vehicle displays a warning light indicating a fault with the b396d code stored in the system.
- Symptoms: Service Engine Soon Warning Light ON.
- Possible loss of power while driving.
- Unusual engine noises.
- Difficulty starting the engine.
- Rough idling or stalling.
Causes of the b396d OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code B396D include faulty steering angle sensor or wiring issues.
- B396D can be caused by a faulty Liftgate Control SwitchInterior.
- A Liftgate Control SwitchInterior harness that is open or shorted.
- A Liftgate Control SwitchInterior circuit with poor electrical connection.
- A faulty Liftgate Control Module.
Fixing Error Code b396d Step By Step
To address fault code B396D, inspect and repair the steering wheel position sensor circuit as needed.
- To fix OBDII code B396D, first, review the possible causes related to this code.
- Visually examine the wiring harness and connectors associated with the affected system.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Perform a thorough check of the affected system to ensure all components are functioning correctly.
- Replace any damaged wiring or connectors as needed.
- Clear the fault code from the vehicle’s computer using a diagnostic scan tool.
- Test drive the vehicle to verify that the issue has been resolved.
Cost Of Fixing b396d Fault Code
Diagnosing and repairing fault code B396D may involve inspecting and potentially replacing the steering wheel position sensor.
The cost to diagnose and fix OBD code B396D depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity can affect the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the b396d OBD Code
Code B396D relates to a fault in the rear seat belt retractor sensor circuit.
OBD code B396D means Right Rear Position Sensor Circuit Range/Performance on a BMW vehicle.
This code is triggered by the Body Control Module (BCM) when it detects a fault in the right rear position sensor circuit.
The right rear position sensor is part of the vehicle’s suspension system and is responsible for monitoring the ride height and position of that corner of the vehicle.
When the BCM detects that the sensor circuit is operating outside of its expected range or performance parameters, it will set this diagnostic trouble code (DTC) B396D.
Mechanic’s Tech Notes
Code B396D indicates an issue with the rear vertical position sensor circuit in the vehicle’s suspension system.
OBDII code B396D indicates an issue with the Transmission Control Module (TCM) power circuit.
To diagnose, use a voltmeter to check TCM power and ground connections for proper voltage levels.
Utilize a scan tool to confirm TCM communication over the Controller Area Network (CAN) network.
Visually inspect wiring harnesses and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
If all checks out, consider reprogramming the TCM.
FAQ
OBD code B396D indicates an issue with the Liftgate Control SwitchInterior. Check wiring harness, connectors, and Liftgate Control Module for faults.
Common symptoms for code B396D include Engine Light ON, caused by issues like faulty liftgate control switch, harness problems, or faulty control module. Inspect and repair as needed.
Diagnose OBD code B396D by checking Liftgate Control SwitchInterior and harness for faults. Inspect connectors for damage or corrosion. Repair as needed.
Wrap Up
If your vehicle displays OBD code b396d, you may experience issues with the fuel pressure sensor circuit in the fuel system.
This could be caused by a faulty fuel pressure sensor, damaged wiring, or poor electrical connections.
To address OBD code b396d, start by inspecting the wiring harness and connectors related to the fuel pressure sensor.
Check for any signs of damage, corrosion, or loose connections.
Test the fuel pressure sensor for proper operation and replace it if necessary to resolve the issue.
