OBD code B3883 indicates an issue with the License Plate Lamp circuit.
Symptoms include the Engine Light being ON.
This code is commonly caused by a faulty License Plate Lamp, open/shorted harness, poor electrical connection, or a faulty Body Control Module (BCM).
It’s not a serious issue but should be addressed.
To fix, inspect the wiring harness, connectors, and components for any damage or corrosion.
| Repair Importance Level | 3.33 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 3.33 (Out of 10) |
Symptoms of the b3883 OBD Code
The vehicle displays a warning light indicating a fault with the b3883 code stored in the system.
- Symptoms: Service Engine Soon Warning Light may illuminate.
- Rough idle may be experienced.
- Engine performance may feel sluggish.
- Vehicle may hesitate during acceleration.
Causes of the b3883 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code B3883 include issues with the steering column control module.
- B3883 can be caused by a faulty License Plate Lamp.
- A License Plate Lamp harness that is open or shorted.
- A License Plate Lamp circuit with poor electrical connection.
- A faulty Body Control Module (BCM).
Fixing Error Code b3883 Step By Step
To resolve fault code B3883, inspect and repair the driver’s door ajar switch circuit.
- To fix OBDII code B3883, first, review the possible causes related to this code.
- Visually examine the wiring harness and connectors associated with the affected component.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Perform a thorough inspection of the wiring to ensure there are no issues present.
- If any faults are found during the inspection, repair or replace the damaged wiring or connectors accordingly.
- Clear the fault code from the vehicle’s computer using a scan tool to see if the issue has been resolved.
- If the code persists, further diagnostics may be necessary to pinpoint the exact cause of the problem.
Cost Of Fixing b3883 Fault Code
Diagnosing and repairing fault code B3883 may involve inspecting and replacing the HVAC blower motor control module.
The cost to diagnose and fix OBD code B3883 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity of the repair can influence the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the b3883 OBD Code
B3883 indicates a fault with the rear wiper motor park switch circuit.
OBD code B3883 means Sunload Sensor Circuit Range/Performance on a General Motors vehicle.
This code is triggered by the Body Control Module (BCM) when it detects a circuit range or performance issue with the sunload sensor.
The sunload sensor is part of the HVAC system and measures the intensity of sunlight to adjust the climate control settings inside the vehicle.
When the sensor malfunctions or sends out of range signals, the BCM sets code B3883.
Mechanic’s Tech Notes
This code indicates a fault with the rear wiper motor park switch circuit.
OBDII code B3883 indicates a problem with the Transmission Control Module (TCM) power circuit.
To diagnose, use a multimeter to check TCM power and ground connections for proper voltage levels.
Utilize a scan tool to confirm TCM communication over the Controller Area Network (CAN) bus.
Visually inspect wiring harnesses and connectors for any damage, and ensure connector pins are not broken, bent, or corroded.
If necessary, consider reprogramming the TCM.
FAQ
OBD code B3883 indicates an issue with the license plate lamp circuit. Check for faults in the lamp, harness, connectors, or BCM for repair.
Common symptoms of OBD code B3883 include Engine Light ON, caused by issues like faulty license plate lamp, harness problems, or faulty BCM. Inspect and repair wiring/connectors.
Diagnose OBD code B3883 by checking license plate lamp and harness for faults. Inspect BCM and wiring for issues. Repair as needed.
Wrap Up
If your vehicle is displaying OBD code b3883, you may experience issues with the transmission fluid pressure sensor circuit.
This could be caused by a faulty transmission fluid pressure sensor, damaged wiring harness, or poor electrical connection.
To address OBD code b3883, start by inspecting the wiring harness and connectors related to the transmission fluid pressure sensor.
Look for any signs of damage, corrosion, or loose connections.
Test the sensor itself for proper operation and replace if necessary to resolve the issue.
