The OBD code B28AF indicates an issue with the Stereo Camera system.
Symptoms include the Engine Light being ON.
This code is commonly caused by a faulty Stereo Camera, open/shorted harness, or poor electrical connection.
While not critical, it can affect safety features.
To fix, inspect the wiring harness, connectors, and components for any damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the b28af OBD Code
The vehicle displays an airbag warning light on the dashboard.
- Symptoms: Service Engine Soon Warning Light ON.
- Possible loss of power during acceleration.
- Rough idling or stalling at stops.
- Engine may run rough or hesitate during driving.
Causes of the b28af OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
B28AF fault code may be triggered by a faulty seatbelt buckle switch.
- B28AF can be caused by a faulty Stereo Camera.
- A Stereo Camera harness that is open or shorted.
- A Stereo Camera circuit with a poor electrical connection.
Fixing Error Code b28af Step By Step
To address fault code B28AF, inspect and potentially replace the passengerside seatbelt buckle switch.
- To fix OBDII code B28AF, first, review the possible causes related to this code.
- Visually examine the wiring harness and connectors associated with the affected component.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no visible issues are found, consider resetting the module that controls the component triggering the code.
- Perform any necessary software updates recommended by the vehicle manufacturer.
- Replace the component if all other steps fail to resolve the issue.
Cost Of Fixing b28af Fault Code
The repair for fault code B28AF may involve replacing the passengerside seatbelt buckle assembly.
The cost to diagnose and fix OBD code B28AF depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Actual cost may vary based on shop rates and the complexity of the repair.
Details of the b28af OBD Code
Code B28AF relates to a fault in the passenger side seatbelt pretensioner circuit.
OBD code B28AF means the Right Rear Side Object Detection Sensor 2 Circuit Low Voltage error.
This code is triggered by the Body Control Module (BCM) when it detects a low voltage condition in the circuit related to the right rear side object detection sensor 2. This sensor is part of the vehicle’s parking assist system and is responsible for detecting obstacles or objects on the right rear side of the vehicle.
When the voltage in the circuit drops below a specified threshold, the BCM sets this diagnostic trouble code (DTC) B28AF to indicate the issue with the sensor circuit.
Mechanic’s Tech Notes
Code B28AF indicates a fault in the passengerside seatbelt buckle switch circuit.
OBDII code B28AF typically indicates a problem with the transmission control module (TCM) power supply.
To diagnose this issue, use a multimeter to check the TCM’s power and ground connections for proper voltage levels.
Additionally, utilize a scan tool to confirm if the TCM communicates over the Controller Area Network (CAN) network.
If the TCM does not respond, reprogramming or reflashing it may be necessary.
Visually inspect the wiring harness and connectors for any damage, and ensure that connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection can help pinpoint and resolve the root cause of the B28AF fault code.
FAQ
OBD code B28AF indicates an issue with the stereo camera system. Check for faults in the camera, wiring, or connections for repair.
Common symptoms of OBD code B28AF include Engine Light ON. Possible causes are a faulty Stereo Camera or related wiring issues. Inspect and repair as needed.
Diagnose OBD code B28AF by checking for a faulty stereo camera, open/shorted harness, or poor electrical connection. Inspect wiring and connectors for damage or corrosion.
Wrap Up
If your vehicle is displaying OBD code b28af, you may experience issues with the transmission fluid temperature sensor circuit.
This could be caused by a faulty transmission fluid temperature sensor, damaged wiring harness, or poor electrical connection.
To address OBD code b28af, start by inspecting the transmission fluid temperature sensor and its wiring harness for any signs of damage or corrosion.
Test the sensor’s resistance and ensure proper electrical connections.
Replace the sensor if necessary and repair any damaged wiring to resolve the issue.
