OBD code B2699 indicates a fault with the Right Low Beam Headlamp circuit.
Symptoms include the Engine Light being ON.
Causes may include a faulty headlamp, wiring issues, relay problems, or a malfunctioning Body Control Module.
This issue is not severe but affects visibility.
To fix, inspect the headlamp, wiring, connectors, and related components for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the b2699 OBD Code
The vehicle displays a warning light indicating an issue with the immobilizer system.
- Symptoms: Service Engine Soon Warning Light may illuminate.
- Vehicle may not start.
- Engine may not crank.
- Engine may crank but not start.
- Engine may start and stall immediately.
Causes of the b2699 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code B2699 include issues with the immobilizer system or key programming.
- B2699 can be caused by a Faulty Right Low Beam Headlamp.
- A Right Low Beam Headlamp harness that is open or shorted.
- A Right Low Beam Headlamp circuit with poor electrical connection.
- A Faulty Low Beam Headlamp Relay.
- A Faulty Body Control Module (BCM).
Fixing Error Code b2699 Step By Step
To address fault code B2699, inspect and repair the ignition key transponder circuit as needed.
- To fix OBDII code B2699, first, review the possible causes related to this code.
- Visually inspect the wiring harness and connectors associated with the code.
- Check for any damaged components and examine the connector pins for signs of being broken, bent, pushed out, or corroded.
- Repair or replace any damaged wiring or connectors found during the inspection.
- Clear the fault code from the vehicle’s computer using a scan tool.
- Test drive the vehicle to ensure the code does not return, indicating a successful repair.
Cost Of Fixing b2699 Fault Code
The repair for fault code B2699 typically involves diagnosing and fixing a communication issue with the key.
The cost to diagnose and fix OBD code B2699 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and the complexity of the repair can influence the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the b2699 OBD Code
B2699 code indicates a malfunction in the immobilizer antenna circuit.
OBD code B2699 indicates an issue with the keyless entry receiver.
This code is triggered by the body control module (BCM) when it detects a malfunction in the keyless entry receiver.
The keyless entry receiver is part of the vehicle’s security system and is responsible for receiving signals from the key fob to lock and unlock the doors.
When this component fails or malfunctions, the BCM sets code B2699 to indicate the problem with the keyless entry receiver.
Mechanic’s Tech Notes
Code B2699 indicates a communication error between the key and the immobilizer system.
OBDII code B2699 indicates an issue with the transmission control module (TCM) power supply.
To diagnose, use a multimeter to check TCM power and ground connections for proper voltage and continuity.
Utilize a scan tool to confirm TCM communication over the Controller Area Network (CAN) bus.
Visually inspect wiring harnesses and connectors for any damage, and ensure connector pins are not broken, bent, or corroded.
If necessary, consider reprogramming or reflashing the TCM.
This comprehensive approach will help pinpoint the root cause of the problem and facilitate an effective repair.
FAQ
OBD code B2699 indicates an issue with the right low beam headlamp circuit. Check for faults in the headlamp, harness, relay, or BCM. Inspect wiring and connectors for damage.
Common symptoms of OBD code B2699 include Engine Light ON, caused by issues like faulty right low beam headlamp, harness problems, relay failure. Fix involves inspecting wiring and connectors.
Diagnose OBD code B2699 by checking right low beam headlamp, harness, relay, and BCM. Inspect wiring for damage or poor connections. Fix as needed.
Wrap Up
If your vehicle displays OBD code b2699, you may experience issues with the immobilizer system, such as difficulty starting the engine or the engine not starting at all.
This code could indicate a problem with the immobilizer antenna, key transponder, or the immobilizer control module.
To address OBD code b2699, start by checking the wiring and connectors related to the immobilizer system.
Inspect the immobilizer antenna for damage or corrosion, test the key transponder for proper functioning, and ensure the immobilizer control module is receiving power and ground as needed.
Replace any faulty components
