The OBD code B25C9 indicates a problem with the Driver Door Ajar Switch 2 circuit in the Body Control Module (BCM).
Symptoms include the Engine Light being ON.
The issue is typically caused by a faulty switch, wiring harness issues, or a malfunctioning BCM.
It is important to address this problem promptly to prevent further electrical issues.
To fix it, inspect the wiring harness and connectors for any damage or poor connections, and check the switch for proper operation.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the b25c9 OBD Code
The vehicle displays a warning light indicating a fault with the B25C9 code stored.
- Symptoms: Service Engine Soon Warning Light comes on.
- Engine may stall unexpectedly.
- Vehicle may experience rough idling.
- Engine performance may feel sluggish.
Causes of the b25c9 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code B25C9 include faulty wiring, sensor issues, or module malfunctions.
- B25C9 can be caused by a faulty Driver Door Ajar Switch 2.
- A Driver Door Ajar Switch 2 harness that is open or shorted.
- A Driver Door Ajar Switch 2 circuit with a poor electrical connection.
- A faulty Left Front Door Latch Assembly.
- Or a faulty Body Control Module (BCM).
Fixing Error Code b25c9 Step By Step
To address fault code B25C9, inspect and repair the HVAC control module as needed.
- To fix OBDII code B25C9, first, review the possible causes related to this code.
- Visually inspect the wiring harness and connectors associated with the affected component.
- Check for any damaged components and ensure the connector pins are not broken, bent, pushed out, or corroded.
- If no issues are found during the visual inspection, proceed to test the component itself for proper operation.
- Replace the faulty component if necessary.
- Clear the fault code using a scan tool and test drive the vehicle to verify the repair.
Cost Of Fixing b25c9 Fault Code
Diagnosing and repairing fault code B25C9 may involve inspecting and replacing the ambient light sensor.
The cost to diagnose and fix OBD code B25C9 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour.
The total cost will vary based on shop rates, complexity of the issue, and any additional parts or services needed.
Details of the b25c9 OBD Code
B25C9 code indicates a malfunction in the rear door lock switch circuit.
OBD code B25C9 means Left Rear Side Object Detection Sensor 1 Circuit Short to Ground.
This code is triggered by the Body Control Module (BCM) when it detects a short to ground in the circuit of the left rear side object detection sensor 1. This sensor is part of the vehicle’s parking assist system and is responsible for detecting obstacles on the left rear side of the vehicle.
When a short to ground is detected in the sensor circuit, it can lead to inaccurate or unavailable data from the sensor, affecting the proper functioning of the parking assist system.
Mechanic’s Tech Notes
This code indicates a malfunction in the rear door latch sensor circuit.
To diagnose OBDII code B25C9, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
Address any issues found during the inspection to resolve the B25C9 fault code.
FAQ
OBD code B25C9 indicates an issue with the Driver Door Ajar Switch 2 circuit. Check for faulty switch, wiring, or BCM. Inspect and repair as needed.
Common symptoms of OBD code B25C9 include Engine Light ON, caused by issues with Driver Door Ajar Switch 2, wiring, Left Front Door Latch, or Body Control Module.
Diagnose and repair OBD code B25C9 by checking for a faulty Driver Door Ajar Switch 2, harness issues, poor connections, or faulty Left Front Door Latch Assembly.
Wrap Up
If your vehicle displays OBD code b25c9, you may experience issues with the automatic transmission system, such as erratic shifting, harsh engagement, or transmission slipping.
This code typically indicates a problem with the transmission fluid pressure sensor ‘D’ circuit, which could be caused by a faulty sensor, damaged wiring, or poor electrical connections.
To address OBD code b25c9, start by inspecting the wiring harness and connectors related to the transmission fluid pressure sensor ‘D.
‘ Look for any signs of damage, corrosion, or loose connections.
Test the sensor itself for proper operation and replace it
