The OBD code B2414 indicates a fault with the Steering Position Sensor in the Adaptive Frontlighting System (AFS) ECU.
Symptoms include the Engine Light being ON.
The issue may stem from a faulty sensor, wiring harness issues, or poor electrical connections.
While not a critical problem, it should be addressed promptly.
To fix it, inspect the sensor, wiring, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the b2414 OBD Code
The vehicle displays an illuminated airbag warning light on the dashboard.
- Symptoms: Service Engine Soon Warning Light ON.
- Loss of communication with HVAC control module.
- Heating, ventilation, and air conditioning system may not function properly.
Causes of the b2414 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code B2414 include faulty seat belt buckle switch or wiring issues.
- B2414 can be caused by a Faulty Steering Position Sensor.
- A Steering Position Sensor harness that is open or shorted.
- A Steering Position Sensor circuit with poor electrical connection.
- A Faulty Adaptive Frontlighting System (AFS) ECU.
Fixing Error Code b2414 Step By Step
To resolve fault code B2414, inspect and repair the HVAC door actuator circuit as needed.
- To fix OBDII code B2414, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the code.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Repair or replace any damaged wiring or connectors found during the inspection.
- Clear the fault code from the vehicle’s computer using a scan tool.
- Test drive the vehicle to verify if the code returns.
- If the code persists, further diagnosis may be needed to pinpoint the exact cause of the issue.
Cost Of Fixing b2414 Fault Code
Diagnosing and repairing fault code B2414 may involve inspecting and replacing the HVAC door actuator.
The cost to diagnose and fix OBD code B2414 is influenced by the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, affecting the total cost.
Other factors like shop rates and the complexity of the repair can also impact the final price.
Details of the b2414 OBD Code
B2414 code indicates a malfunction in the driver’s seat belt buckle switch circuit.
OBD code B2414 means Driver Seat Belt Buckle Switch Circuit Short to Ground.
This code is triggered by the restraint control module (RCM) when it detects a short to ground in the circuit of the driver seat belt buckle switch.
The signal or system involved is the circuit that monitors the status of the driver’s seat belt buckle to ensure it is properly latched.
Mechanic’s Tech Notes
For fault code B2414, check for issues with the driver’s door key cylinder switch circuit.
OBDII code B2414 indicates a fault with the body control module (BCM) output circuit.
To diagnose, use a voltmeter to check for proper voltage at the BCM connector.
Inspect the wiring for any damage or corrosion.
Test the BCM’s ability to communicate over the CAN network using a scan tool.
If the BCM does not respond, reprogramming or replacing the BCM may be necessary.
Be thorough in checking the wiring and connectors for any issues that could be causing the fault code.
FAQ
OBD code B2414 indicates a faulty Steering Position Sensor. Symptoms include Engine Light ON. Fix: Inspect sensor, wiring harness, connectors for damage, and check connector pins for issues.
Common symptoms of OBD code B2414 include Engine Light ON, caused by a faulty Steering Position Sensor or issues with the sensor circuit. Inspect and repair wiring connections as needed.
Diagnose OBD code B2414 by checking steering position sensor and related wiring for faults. Repair by fixing sensor or wiring issues as needed.
Wrap Up
If your vehicle is displaying OBD code b2414, you may experience issues with the driver’s door ajar switch circuit.
This could be caused by a faulty door ajar switch, damaged wiring, or poor electrical connections in the circuit.
To address OBD code b2414, start by inspecting the driver’s door ajar switch and its wiring harness for any signs of damage or corrosion.
Test the switch for proper operation and ensure all electrical connectors are securely attached.
Replace the switch if necessary and repair any damaged wiring to resolve the issue.
