The OBD code B2313 indicates a fault with the Front Power Window Regulator Motor Assembly Left (LH).
Symptoms include the Engine Light being ON.
This code is commonly caused by issues like a faulty motor assembly, open or shorted harness, or poor electrical connection.
It is not a severe issue.
To fix it, inspect the wiring harness, connectors, and components for any damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the b2313 OBD Code
The vehicle displays an airbag warning light on the dashboard with fault code B2313 stored.
- With OBD code B2313, the Service Engine Soon Warning Light may illuminate.
- The vehicle may experience intermittent power steering assist.
- A clicking or whining noise may be heard from the power steering system.
Causes of the b2313 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code B2313 include faulty wiring, damaged connectors, or a defective control module.
- B2313 can be caused by a faulty Front Power Window Regulator Motor Assembly Left (LH).
- A Front Power Window Regulator Motor Assembly Left harness that is open or shorted.
- A Front Power Window Regulator Motor Assembly Left circuit with poor electrical connection.
Fixing Error Code b2313 Step By Step
Repair the wiring harness for the specific fault code B2313.
- To fix OBDII code B2313, review the possible causes related to the code.
- Visually examine the wiring harness and connectors associated with the affected circuit.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Repair or replace any damaged wiring or connectors found during the inspection.
- Clear the fault code using a scan tool and test drive the vehicle to verify the repair.
Cost Of Fixing b2313 Fault Code
Diagnosing and repairing fault code B2313 may involve inspecting and replacing faulty seat belt pretensioner components.
The cost to diagnose and fix OBD code B2313 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the general cost could be between $75 and $150. Factors like shop rates and complexity can affect the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the b2313 OBD Code
B2313 code indicates a fault in the mirror switch memory position circuit.
OBD code B2313 means Passenger Compartment Air Temperature Sensor Circuit Short to Ground.
This code is triggered by the Body Control Module (BCM) when it detects a short to ground in the circuit of the passenger compartment air temperature sensor.
The sensor is part of the HVAC (Heating, Ventilation, and Air Conditioning) system and is responsible for monitoring the temperature inside the vehicle cabin.
When a short to ground is detected in the sensor circuit, the BCM sets code B2313 to indicate the issue with the sensor’s electrical circuit.
Mechanic’s Tech Notes
For fault code B2313, refer to detailed diagnostic information for troubleshooting and repair guidance.
To diagnose and fix OBDII code B2313, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.
This thorough inspection can help identify and resolve the issue causing the B2313 fault code.
FAQ
OBD code B2313 indicates an issue with the Front Power Window Regulator Motor Assembly Left circuit. Check wiring harness, connectors, and components for damage.
Common symptoms of OBD code B2313 include Engine Light ON. Causes may be a faulty Front Power Window Regulator Motor Assembly Left or related wiring issues. Fix: Inspect and repair wiring and components.
Diagnose OBD code B2313 by checking the left front power window motor assembly and its wiring for faults. Repair any damaged components or connections found.
Wrap Up
If your vehicle is displaying OBD code b2313, you may experience issues with the Park Brake Motor Switch Circuit.
This could be caused by a faulty park brake motor switch, damaged wiring harness, or poor electrical connection.
To address OBD code b2313, check the park brake motor switch for proper operation, inspect the wiring for any signs of damage or corrosion, and ensure all electrical connections are secure.
Replace the park brake motor switch if necessary and repair any damaged wiring to resolve the issue.
