The OBD code B22A9 indicates a fault with the Radio Frequency Hub (RFHUB) Module.
Symptoms include the Engine Light being ON.
The issue is typically caused by a faulty RFHUB Module, open/shorted harness, or poor electrical connection.
While not critical, it should be addressed promptly.
To fix, inspect the RFHUB Module, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the b22a9 OBD Code
The vehicle displays a warning light indicating a fault with the b22a9 code stored in the system.
- Symptoms: Service Engine Soon Warning Light ON.
- Engine may stall at idle.
- Rough idle.
- Engine may hesitate or lack power during acceleration.
Causes of the b22a9 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code B22A9 include issues with the passenger seat occupancy sensor system.
- B22A9 can be caused by a faulty Radio Frequency Hub (RFHUB) Module.
- A Radio Frequency Hub (RFHUB) Module harness that is open or shorted.
- A Radio Frequency Hub (RFHUB) Module circuit with a poor electrical connection.
Fixing Error Code b22a9 Step By Step
To resolve fault code B22A9, inspect and repair the wiring harness for any damage or corrosion.
- To fix OBDII code B22A9, first, review the possible causes related to this code.
- Visually examine the wiring harness and connectors associated with the affected component.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no visible issues are found, consider performing a module reset or software update on the relevant control module.
- Finally, clear the fault code and test drive the vehicle to ensure the issue has been resolved.
Cost Of Fixing b22a9 Fault Code
Diagnosing and repairing fault code B22A9 may involve inspecting and replacing the steering angle sensor.
The cost to diagnose and fix OBD code B22A9 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour.
The total cost will vary based on shop rates, complexity of the issue, and any additional parts or services needed.
Details of the b22a9 OBD Code
B22A9 code indicates an issue with the driver’s seatbelt buckle switch circuit.
OBD code B22A9 means Right Rear Side Object Sensor 2 Circuit Short to Ground.
This code is triggered by the Body Control Module (BCM) when it detects a short to ground in the circuit of the right rear side object sensor 2. The right rear side object sensor 2 is part of the vehicle’s parking assist system, which helps the driver detect obstacles when parking or maneuvering the vehicle.
Mechanic’s Tech Notes
This code indicates an issue with the passengerside seatbelt buckle switch circuit.
To diagnose OBDII code B22A9, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This code typically indicates a communication issue between modules, so focusing on the TCM and its connections is crucial for a successful diagnosis and repair.
FAQ
OBD code B22A9 indicates an issue with the Radio Frequency Hub (RFHUB) Module. Check for wiring harness faults and poor electrical connections.
Common symptoms of OBD code B22A9 include Engine Light ON. Causes may be a faulty RFHUB module or related wiring issues. Fix: Inspect and repair wiring and connectors.
Diagnose OBD code B22A9 by checking RFHUB module and harness for faults. Inspect wiring, connectors, and pins for damage or corrosion.
Wrap Up
If your vehicle is displaying OBD code b22a9, you may experience issues with the transmission range sensor circuit.
This could be caused by a faulty transmission range sensor, damaged wiring harness, or poor electrical connection.
To address OBD code b22a9, start by inspecting the transmission range sensor and its wiring harness for any signs of damage or corrosion.
Test the sensor’s functionality and ensure all electrical connections are secure.
Replace the sensor if necessary and repair any damaged wiring to resolve the issue.
