OBD code B2208 indicates an issue with the Occupant Restraint Controller (ORC) system.
Symptoms include the Air Bag Warning Light being illuminated.
This is commonly caused by a faulty ORC, open/shorted ORC harness, or poor electrical connection.
While not a critical issue, it should be addressed promptly.
To fix, inspect the ORC system components, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the b2208 OBD Code
The vehicle displays an airbag warning light on the dashboard with fault code B2208 stored.
- Symptoms: Air Bag Warning Light ON
Causes of the b2208 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code B2208 include issues with the occupant classification system.
- B2208 can be caused by a faulty Occupant Restraint Controller (ORC).
- An open or shorted Occupant Restraint Controller (ORC) harness.
- Poor electrical connection in the Occupant Restraint Controller (ORC) circuit.
Fixing Error Code b2208 Step By Step
Repair involves inspecting and repairing the driver’s door ajar switch circuit for fault code B2208.
- To fix OBDII code B2208, review the possible causes related to the code.
- Visually examine the wiring harness and connectors associated with the airbag system.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Ensure all connections are secure and free of corrosion.
- If no visible issues are found, consider resetting the airbag module using a professional diagnostic scan tool.
- If the problem persists after resetting, the airbag module may need to be replaced with a new one to resolve the B2208 fault code.
Cost Of Fixing b2208 Fault Code
Diagnosing and repairing fault code B2208 may involve inspecting and potentially replacing the occupant classification module.
The cost to diagnose and fix OBD code B2208 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour.
The total cost will vary based on shop rates, complexity of the issue, and any additional parts or services needed.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the b2208 OBD Code
B2208 code indicates a passenger airbag indicator circuit failure.
OBD code B2208 means Front Wiper Motor Relay Coil Circuit Short to Battery.
This code is triggered by the Body Control Module (BCM) when it detects a short to battery in the front wiper motor relay coil circuit.
The system involved is the front wiper motor relay circuit, which controls the operation of the front wiper motor in the vehicle.
Mechanic’s Tech Notes
Code B2208 indicates a fault in the front passenger airbag indicator circuit.
To diagnose OBDII code B2208, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, focusing on broken, bent, or corroded pins.
Ensure all connections are secure.
If the issue persists, consider consulting a professional for further diagnosis and repair.
FAQ
OBD code B2208 indicates an issue with the Occupant Restraint Controller (ORC). Check for wiring harness faults and connector issues causing the Air Bag Warning Light to illuminate.
Common symptoms of OBD code B2208 include Air Bag Warning Light ON. Causes may be a faulty Occupant Restraint Controller (ORC) or related wiring issues. Fix: Inspect and repair wiring connections.
Diagnose and repair OBD code B2208 by checking for a faulty Occupant Restraint Controller (ORC), open/shorted harness, or poor electrical connection. Inspect wiring and connectors for damage.
Wrap Up
If your airbag warning light is on and you see OBDII code b2208, it may indicate a fault in the front impact sensor circuit.
This could be caused by damaged wiring, a faulty front impact sensor, or poor connections in the circuit.
To address OBDII code b2208, check the wiring harness for any signs of damage or corrosion.
Inspect the front impact sensor and its connectors for proper connection and integrity.
Replace any faulty components and ensure all connections are secure to resolve the issue effectively.
