OBD code B1609 indicates a fault with the Illuminated Entry Input Switch in the vehicle.
Symptoms include the Engine Light being ON.
This code is usually caused by a faulty switch, open or shorted harness, or poor electrical connection.
While not a critical issue, it should be addressed promptly.
To fix it, inspect the switch, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the b1609 OBD Code
The vehicle displays a warning light indicating a fault with the passenger airbag circuit (B1609).
- Symptoms: Service Engine Soon Warning Light may illuminate.
- Vehicle may experience intermittent starting issues.
- Steering wheel may feel stiff or difficult to turn.
- Horn may not work properly.
- Brake pedal may feel spongy.
Causes of the b1609 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
B1609 fault code may be triggered by a faulty passenger airbag indicator circuit.
- B1609 can be caused by a faulty Illuminated Entry Input Switch.
- An open or shorted Illuminated Entry Input Switch harness.
- A poor electrical connection in the Illuminated Entry Input Switch circuit.
Fixing Error Code b1609 Step By Step
Address the wiring issue related to fault code B1609 by checking for damaged or loose connections.
- To fix OBDII code B1609, first, review the possible causes mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the power and ground connections to the affected module.
- Test the module for proper operation and communication.
- If necessary, reprogram or replace the module to resolve the issue.
Cost Of Fixing b1609 Fault Code
Diagnosing and repairing fault code B1609 may involve inspecting and replacing the seat belt buckle switch.
The cost to diagnose and fix OBD code B1609 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour.
The total cost will vary based on shop rates, complexity of the issue, and any additional parts or services needed.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the b1609 OBD Code
B1609 indicates a fault with the passenger airbag indicator circuit.
OBD code B1609 means Lamp Turn Signal Front Output Circuit Short to Battery.
This code is triggered by the Body Control Module (BCM) when it detects a short to battery in the front turn signal lamp circuit.
The BCM monitors the circuit for proper operation and if it detects a short to battery, it will set this diagnostic trouble code (DTC) B1609. This code is specific to issues related to the front turn signal lamp circuit and indicates a problem with the circuitry causing a short to battery voltage.
Mechanic’s Tech Notes
Code B1609 indicates a problem with the passenger airbag indicator circuit.
OBDII code B1609 indicates a problem with the vehicle’s internal control module.
To diagnose, check the Transmission Control Module (TCM) power and ground using a multimeter.
Use a scan tool to confirm TCM communication over the Controller Area Network (CAN) network.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of corrosion, bending, or breakage.
This thorough inspection will help pinpoint the issue and guide you towards an effective repair.
FAQ
OBD code B1609 indicates a faulty Illuminated Entry Input Switch. Symptoms include Engine Light ON. Fix: Inspect wiring harness, connectors, and switch for damage or poor connection.
Common symptoms of OBD code B1609 include Engine Light ON. Causes may be a faulty Illuminated Entry Input Switch or related wiring issues. Fix: Inspect and repair wiring and connectors.
Diagnose OBD code B1609 by checking for a faulty Illuminated Entry Input Switch, open/shorted harness, or poor connection. Inspect wiring harness and connectors for damage or corrosion.
Wrap Up
If your vehicle is displaying OBD code b1609, you may experience issues with the passenger airbag indicator light.
This could be caused by a faulty passenger airbag indicator sensor, a wiring problem in the airbag system, or a malfunction in the airbag control module.
To address OBD code b1609, start by checking the wiring connections and harness for any signs of damage or corrosion.
Test the passenger airbag indicator sensor for proper operation and replace if necessary.
If the issue persists, further diagnostics on the airbag control module may be required.
