The OBD code B153E indicates an issue with the liftgate motor circuit.
Symptoms include the Engine Light being ON.
This code affects the Liftgate Control Module.
Possible causes are a faulty liftgate motor, open/shorted harness, or poor electrical connection.
It’s important to address this issue promptly to avoid further damage.
A possible fix is to inspect the wiring harness and connectors for any damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the b153e OBD Code
The vehicle displays an airbag warning light on the dashboard with fault code B153E stored.
- Symptoms: Service Engine Soon Warning Light ON.
- Possible loss of communication with the immobilizer control module.
- Difficulty starting the vehicle.
- Engine stalling while driving.
- Difficulty shifting gears in an automatic transmission vehicle.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Causes of the b153e OBD Code
Possible reasons for fault code B153E include issues with the passenger airbag indicator circuit.
- B153E can be caused by a Faulty Liftgate Motor.
- A Liftgate Motor harness that is open or shorted.
- A Liftgate Motor circuit with poor electrical connection.
- A Faulty Liftgate Control Module.
Fixing Error Code b153e Step By Step
To resolve fault code B153E, inspect and repair the driver’s side airbag circuit as needed.
- To fix OBDII code B153E, first, review the possible causes mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the wiring leading to the airbag control module for any issues.
- Test the airbag control module for proper operation and replace if necessary.
- Clear the fault codes using a diagnostic scan tool and perform a test drive to verify the repair.
Cost Of Fixing b153e Fault Code
Diagnosing and repairing fault code B153E may involve inspecting and replacing the occupant classification system components.
The cost to diagnose and fix OBD code B153E depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity can affect the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the b153e OBD Code
B153E code indicates a mismatch between the vehicle’s key and immobilizer system.
OBD code B153E means Wiper Rear Motor Stalled.
This code is triggered by the Body Control Module (BCM) when it detects that the rear wiper motor is not functioning properly.
The BCM monitors the rear wiper motor operation and if it detects a stall or lack of movement when the motor is commanded to operate, it will set this code.
This code is specific to issues related to the rear wiper motor and its operation.
Mechanic’s Tech Notes
Code B153E relates to a malfunction in the passenger airbag indicator circuit.
OBDII code B153E indicates a problem with the transmission control module (TCM) power supply.
To diagnose, use a multimeter to check TCM power and ground connections for proper voltage levels.
Utilize a scan tool to confirm TCM communication over the Controller Area Network (CAN) network.
Visually inspect wiring harnesses and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
If necessary, consider reprogramming or reflashing the TCM.
FAQ
OBD code B153E indicates an issue with the liftgate motor circuit. Check for faults in the liftgate motor, harness, connectors, and control module.
Common symptoms of OBD code B153E include Engine Light ON, caused by issues like faulty Liftgate Motor, harness problems, or Liftgate Control Module faults. Inspect and repair affected components.
Diagnose OBD code B153E for Liftgate Motor issues causing Engine Light ON. Inspect wiring harness, connectors, Liftgate Motor, and Control Module for faults.
Wrap Up
If your vehicle is displaying OBD code b153e along with issues like erratic speedometer readings or ABS system malfunctions, it may indicate a fault in the vehicle speed sensor circuit.
This could be caused by a faulty vehicle speed sensor, damaged wiring harness, or poor electrical connections.
To address OBD code b153e, start by inspecting the vehicle speed sensor and its wiring for any visible damage.
Test the sensor’s output signal using a multimeter to ensure it is within specifications.
Check the wiring harness for any signs of wear, corrosion, or loose connections.
Replace the sensor if necessary
