OBD code B1035 indicates an issue with the Crash Zone Sensor in the Air Bag system.
Symptoms include the Air Bag Warning Light being illuminated.
This is usually caused by a faulty Crash Zone Sensor, open or shorted sensor harness, poor electrical connection, or a faulty Air Bag Diagnosis Sensor Unit.
It is a serious issue that should be addressed promptly.
To fix it, inspect the sensor, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the b1035 OBD Code
The vehicle displays an airbag warning light on the dashboard with fault code B1035 stored.
- Symptoms: Air Bag Warning Light ON
Causes of the b1035 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
B1035 code typically indicates a fault in the passenger airbag inflator circuit.
- B1035 can be caused by a faulty Crash Zone Sensor.
- A Crash Zone Sensor harness that is open or shorted.
- A poor electrical connection in the Crash Zone Sensor circuit.
- A faulty Air Bag Diagnosis Sensor Unit.
Fixing Error Code b1035 Step By Step
To resolve fault code B1035, inspect and repair the driver’s side airbag circuit as needed.
- To fix OBDII code B1035, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the code.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If the wiring and connectors appear to be in good condition, proceed to test the sensor or module associated with the code for proper operation.
- Replace the sensor or module if necessary.
- Clear the fault codes from the vehicle’s computer using a scan tool.
- Test drive the vehicle to ensure the code does not return.
Cost Of Fixing b1035 Fault Code
The repair for fault code B1035 may involve replacing the passenger airbag module.
The cost to diagnose and fix OBD code B1035 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity of the repair can influence the final cost.
Details of the b1035 OBD Code
B1035 code indicates a fault in the passenger airbag inflator circuit.
OBD code B1035 means Sunload Sensor 1 Circuit Short to Battery.
This code is triggered by the Body Control Module (BCM) when it detects a short to battery in the circuit of the sunload sensor 1. The sunload sensor measures the intensity of sunlight entering the vehicle and helps the HVAC system adjust the temperature and airflow accordingly.
When this circuit has a short to battery, it can affect the accuracy of the sensor readings and may lead to improper HVAC system operation.
Mechanic’s Tech Notes
Code B1035 indicates a fault in the left side impact sensor circuit.
OBDII code B1035 typically indicates an issue with the Transmission Control Module (TCM) power or ground circuits.
To diagnose this, use a multimeter to check the TCM power and ground connections for proper voltage and continuity.
Additionally, utilize a scan tool to communicate with the TCM over the Controller Area Network (CAN) network.
If the TCM does not respond, reprogramming or reflash may be necessary.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection will help pinpoint the root cause of the B1035 fault code.
FAQ
OBD code B1035 indicates a fault with the Crash Zone Sensor in the airbag system. Check sensor, harness, and connections for issues.
Common symptoms of OBD code B1035 include Air Bag Warning Light ON. Causes may be a faulty Crash Zone Sensor or related wiring issues. Inspect and repair as needed.
Diagnose and repair OBD code B1035 by checking for a faulty Crash Zone Sensor, open/shorted harness, poor connections, or faulty Air Bag Diagnosis Sensor Unit. Inspect wiring and connectors.
Wrap Up
If your airbag warning light is on and you see OBDII code b1035, it may indicate a fault in the right front seatbelt pretensioner circuit.
This could be caused by a faulty seatbelt pretensioner, damaged wiring, or poor connections in the circuit.
To address OBDII code b1035, check the wiring and connectors leading to the right front seatbelt pretensioner.
Look for any signs of damage, corrosion, or loose connections.
Test the seatbelt pretensioner for proper operation and replace if necessary.
