OBD code B1013 indicates a fault in the Diagnosis Sensor Unit circuit of the airbag system.
Symptoms include the Air Bag Warning Light being illuminated.
The issue is commonly caused by a faulty Diagnosis Sensor Unit or related wiring harness issues.
While not a critical concern, it is important to address for safety reasons.
To fix, inspect and repair any damaged components or wiring connections in the Diagnosis Sensor Unit circuit.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the b1013 OBD Code
The vehicle displays an airbag warning light on the dashboard with fault code B1013 stored.
- Symptoms: Air Bag Warning Light ON
Causes of the b1013 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code B1013 include faulty seat belt buckle switch or wiring issues.
- B1013 can be caused by a faulty Diagnosis Sensor Unit.
- A Diagnosis Sensor Unit harness that is open or shorted.
- A Diagnosis Sensor Unit circuit with poor electrical connection.
Fixing Error Code b1013 Step By Step
To address fault code B1013, inspect and repair the driver’s airbag module circuit as needed.
- To fix OBDII code B1013, review the possible causes and visually inspect the wiring harness and connectors for any issues.
- Check for damaged components and examine the connector pins for signs of damage or corrosion.
- Test the circuit for continuity and proper voltage supply.
- Replace any damaged wiring or connectors found during the inspection.
- Clear the fault code using a scan tool and test drive the vehicle to ensure the issue has been resolved.
- If the code returns, further diagnosis may be necessary to pinpoint the exact cause of the problem.
Cost Of Fixing b1013 Fault Code
Diagnosing and repairing fault code B1013 may involve inspecting and potentially replacing the occupant classification system components.
The cost to diagnose and fix OBD code B1013 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour.
The total cost will vary based on shop rates, complexity of the issue, and any additional parts or services needed.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the b1013 OBD Code
B1013 code indicates a faulty passenger airbag inflator circuit.
OBD code B1013 indicates an issue with the passenger compartment temperature sensor circuit.
This code is triggered by the Body Control Module (BCM) when it detects a fault in the sensor circuit.
The passenger compartment temperature sensor is part of the HVAC (Heating, Ventilation, and Air Conditioning) system and is responsible for monitoring the interior temperature of the vehicle.
When the sensor or its circuit malfunctions, the BCM sets code B1013 to indicate the problem with the passenger compartment temperature sensor.
Mechanic’s Tech Notes
Code B1013 indicates a fault with the passenger airbag deployment indicator circuit.
To diagnose and fix OBDII code B1013, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage.
Ensure connector pins are not broken, bent, pushed out, or corroded.
Address any issues found during the inspection.
This comprehensive approach will help pinpoint the root cause of the B1013 fault code.
FAQ
OBD code B1013 indicates a fault with the Diagnosis Sensor Unit in the airbag system. Check wiring harness, connectors, and components for issues.
Common symptoms for OBD code B1013 include Air Bag Warning Light ON. Causes may be a faulty Diagnosis Sensor Unit or related wiring issues. Fix: Inspect and repair wiring connections.
Diagnose and repair OBD code B1013 by checking Diagnosis Sensor Unit, harness, and connections for faults. Inspect wiring, connectors, and components for damage or corrosion.
Wrap Up
If your vehicle displays OBD code b1013, you may experience issues with the airbag system, such as a faulty passenger airbag indicator circuit or a defective passenger airbag indicator.
This could be caused by damaged wiring, a malfunctioning passenger airbag indicator sensor, or a problem with the airbag control module.
To address OBD code b1013, check the wiring harness and connectors for any signs of damage or corrosion.
Test the passenger airbag indicator sensor for proper operation and replace if necessary.
Ensure all connections are secure and free of debris to resolve the issue effectively.
