OBD code B0956 indicates a fault with the Parking Assist Front Sensor Right Middle.
Symptoms include the Engine Light being ON.
This issue is commonly caused by a faulty sensor, wiring harness issues, or a malfunctioning Control Module.
It is important to address this problem promptly to ensure proper functioning of the parking assist system.
To fix it, inspect the sensor, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 3.33 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the b0956 OBD Code
The vehicle displays a warning light indicating a fault with the b0956 code.
- Symptoms: Service Engine Soon Warning Light may illuminate.
- Issues with the vehicle’s airbag system.
- Difficulty starting the vehicle.
- Horn may not work properly.
- Steering wheel controls may not function correctly.
Causes of the b0956 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code B0956 include issues with the park brake control module.
- B0956 can be caused by a Faulty Parking Assist Front Sensor Right Middle.
- A Parking Assist Front Sensor Right Middle harness that is open or shorted.
- A Parking Assist Front Sensor Right Middle circuit with a poor electrical connection.
- Or a Faulty Parking Assist Control Module.
Fixing Error Code b0956 Step By Step
To address fault code B0956, inspect and repair the driver’s seat belt buckle switch circuit.
- To fix OBDII code B0956, first, review the possible causes related to this code.
- Visually inspect the wiring harness and connectors associated with the code.
- Check for any damaged components and examine the connector pins for signs of being broken, bent, pushed out, or corroded.
- Repair or replace any damaged wiring or connectors found during the inspection.
- Clear the fault code using a diagnostic scanner.
- Test drive the vehicle to ensure the code does not return.
Cost Of Fixing b0956 Fault Code
The repair for fault code B0956 typically involves diagnosing and replacing the driver’s airbag deployment loop.
The cost to diagnose and fix OBD code B0956 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the general cost could be between $75 and $150. The final cost may vary based on shop rates and the complexity of the repair.
Details of the b0956 OBD Code
Code B0956 indicates a problem with the park brake switch circuit.
OBD code B0956 means Park Brake Switch Circuit High Voltage.
This code is triggered when the body control module (BCM) detects a higher than normal voltage signal from the park brake switch circuit.
The park brake switch is typically located on the parking brake lever or pedal and sends a signal to the BCM when the parking brake is engaged or disengaged.
When the BCM receives a high voltage signal from the park brake switch circuit, it sets code B0956 to indicate a potential issue with the park brake switch circuit.
Mechanic’s Tech Notes
Code B0956 relates to the steering angle sensor circuit, indicating a potential issue with the sensor or its wiring.
OBDII code B0956 indicates a communication issue with the TCM (Transmission Control Module).
To diagnose, check TCM power and ground using a multimeter.
Verify TCM response over the CAN network with a scan tool.
Visually inspect wiring harness and connectors for damage, focusing on broken, bent, or corroded pins.
Reflash the TCM if needed.
This code commonly points to wiring or connector problems, so thorough inspection is crucial.
FAQ
OBD code B0956 indicates an issue with the Parking Assist Front Sensor Right Middle. Check sensor, wiring, and connections for faults.
Common symptoms of OBD code B0956 include Engine Light ON. Causes may be a faulty Parking Assist Front Sensor Right Middle or related wiring issues. Fix: Inspect and repair sensor and wiring.
Diagnose OBD code B0956 by checking Parking Assist Front Sensor Right Middle and its wiring for faults. Repair as needed to resolve the issue.
Wrap Up
If your vehicle is displaying OBD code b0956, you may experience issues with the parking brake warning light staying on even when the brake is released.
This could be caused by a faulty parking brake switch or a problem within the parking brake control module.
To address OBD code b0956, start by checking the wiring and connectors related to the parking brake switch and control module.
Ensure there are no loose connections, damaged wires, or corrosion present.
If no issues are found, consider testing or replacing the parking brake switch or control module as needed.
