OBD code B0083 indicates an issue with the Left Front Impact Sensor circuit in the Air Bag system.
Symptoms include the Air Bag Warning Light being illuminated.
The cause could be a faulty sensor, wiring harness issues, or problems with the Sensing and Diagnostic Module.
This is a serious safety concern.
To fix, inspect and repair any damaged components or wiring connections related to the Left Front Impact Sensor.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the b0083 OBD Code
The vehicle may exhibit issues with the passenger seat belt pretensioner circuit, indicated by fault code B0083.
- Symptoms: Air Bag Warning Light ON
Causes of the b0083 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code B0083 include issues with the passenger seat belt pretensioner circuit.
- B0083 can be caused by a Faulty Left Front Impact Sensor.
- A Left Front Impact Sensor harness that is open or shorted.
- A Left Front Impact Sensor circuit with a poor electrical connection.
- A Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM).
Fixing Error Code b0083 Step By Step
To resolve fault code B0083, inspect and repair the driverside airbag deployment loop circuit.
- To fix OBDII code B0083, first, review the possible causes related to the code.
- Visually inspect the wiring harness and connectors associated with the passenger presence system.
- Check for any damaged components and ensure the connector pins are not broken, bent, pushed out, or corroded.
- If no issues are found during the visual inspection, consider resetting the airbag control module to clear the code.
- If the problem persists after the reset, the passenger presence system sensor or module may need replacement.
Cost Of Fixing b0083 Fault Code
Repairing fault code B0083 typically involves replacing the driverside airbag deployment loop circuit.
The cost to diagnose and fix OBD code B0083 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
Costs depend on labor rates, shop fees, and the complexity of the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the b0083 OBD Code
B0083 indicates a problem with the passenger seatbelt pretensioner circuit.
OBD code B0083 indicates a problem with the right front impact sensor.
This code is triggered by the airbag control module when it detects a fault in the sensor or its circuit.
The right front impact sensor is part of the vehicle’s airbag system and is responsible for detecting a collision on the right front side of the vehicle.
When this sensor fails or malfunctions, it can affect the deployment of the airbags in the event of a crash.
Mechanic’s Tech Notes
For fault code B0083, refer to detailed diagnostic information for troubleshooting and repair guidance.
OBDII code B0083 indicates an issue with the TCM power circuit.
To diagnose, use a voltmeter to check TCM power and ground connections for proper voltage levels.
Utilize a scan tool to confirm TCM communication over the CAN network.
Visually inspect wiring harnesses and connectors for any damage, focusing on broken, bent, or corroded pins.
If no visible issues are found, consider reprogramming the TCM.
This process may require specialized equipment and software.
FAQ
OBD code B0083 indicates an issue with the Left Front Impact Sensor circuit. Check sensor, wiring, and connections for faults to resolve Air Bag Warning Light ON.
Common symptoms of OBD code B0083 include Air Bag Warning Light ON. Causes may be a faulty Left Front Impact Sensor or related wiring issues. Fix: Inspect and repair as needed.
Diagnose OBD code B0083 by checking the left front impact sensor and its wiring for faults. Inspect connectors for damage or corrosion.
Wrap Up
If your airbag warning light is on and you see OBDII code b0083, it may indicate a fault in the passenger seat belt tension sensor circuit.
This could be caused by a faulty sensor, damaged wiring, or poor connections in the system.
To address OBDII code b0083, start by inspecting the wiring harness and connectors related to the passenger seat belt tension sensor.
Look for any signs of damage, corrosion, or loose connections.
Test the sensor itself for proper operation and replace if necessary to resolve the issue.
