OBD code B0052 indicates an issue with the Passenger Seatbelt Sensor in the airbag system.
Symptoms include the Air Bag Warning Light being illuminated.
This is commonly caused by a faulty sensor, open or shorted sensor harness, or poor electrical connection.
While not a critical issue, it should be addressed promptly for safety.
To fix, inspect the sensor, harness, and connections for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the b0052 OBD Code
The vehicle displays an airbag warning light on the dashboard with fault code B0052 stored.
- Symptoms: Air Bag Warning Light ON
Causes of the b0052 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Code B0052 typically indicates an issue with the left side impact sensor circuit.
- B0052 can be caused by a Faulty Passenger Seatbelt Sensor.
- A Passenger Seatbelt Sensor harness that is open or shorted.
- A Passenger Seatbelt Sensor circuit with a poor electrical connection.
Fixing Error Code b0052 Step By Step
To address fault code B0052, inspect and repair the driver frontal deployment loop resistance.
- To fix OBDII code B0052, first, review the possible causes mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the seat belt pretensioner system for any faults or malfunctions.
- Test the seat belt pretensioner system using a diagnostic scan tool to pinpoint the exact issue.
- Replace any faulty seat belt pretensioner components as necessary.
- Clear the fault codes from the vehicle’s computer using the scan tool.
- Finally, perform a test drive to ensure the issue has been resolved.
Cost Of Fixing b0052 Fault Code
Diagnosing and repairing fault code B0052 typically involves inspecting and possibly replacing the driver frontal deployment loop stage 1.
The cost to diagnose and fix OBD code B0052 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour.
The total cost will vary based on shop rates, complexity of the issue, and any additional parts or services needed.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the b0052 OBD Code
B0052 code indicates a problem with the left side airbag deployment loop.
OBD code B0052 indicates a problem with the left side impact sensor.
This code is triggered by the airbag control module when it detects a fault in the left side impact sensor circuit.
The left side impact sensor is part of the vehicle’s airbag system and is responsible for detecting impacts on the left side of the vehicle to deploy the airbags if necessary.
When this sensor malfunctions or its circuit is compromised, the B0052 trouble code is set, indicating a potential issue with the airbag system’s ability to deploy in a left side impact situation.
Mechanic’s Tech Notes
Code B0052 relates to the left side impact sensor circuit malfunction in the vehicle’s airbag system.
To diagnose and fix OBDII code B0052, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.
This code typically indicates a communication issue between modules, so ensuring proper power, ground, and communication signals are crucial for a successful repair.
FAQ
OBD code B0052 indicates a fault with the Passenger Seatbelt Sensor. Check sensor, harness, and connections for issues causing the Air Bag Warning Light to illuminate.
Common symptoms of OBD code B0052 include the Air Bag Warning Light being ON. The causes may be a faulty Passenger Seatbelt Sensor or related wiring issues.
Diagnose OBD code B0052 by checking the passenger seatbelt sensor and its wiring for faults. Repair any damaged components or poor connections found.
Wrap Up
If your vehicle is displaying OBD code b0052, you may experience issues with the left rear side impact sensor circuit.
This could be caused by a faulty sensor, damaged wiring, or poor connections in the circuit.
To address OBD code b0052, start by inspecting the wiring harness and connectors related to the left rear side impact sensor.
Check for any signs of damage, corrosion, or loose connections.
Test the sensor itself for proper functionality and replace if necessary to resolve the issue effectively.
