The OBD code P2006 for Audi indicates a problem with the Intake Manifold Runner Control Circuit.
Symptoms include the Engine Light being ON.
This is usually caused by a faulty Intake Manifold Runner Position Sensor or related wiring issues.
It is important to address this issue promptly to prevent further damage.
A possible fix involves inspecting and repairing the sensor, wiring harness, and connectors.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Audi p2006 OBD Code
The Audi P2006 fault code typically triggers when there is an issue with the intake manifold runner control circuit.
- Symptoms: Engine Light ON.
- Reduced engine power.
- Rough idle.
- Loss of acceleration.
Causes of the Audi p2006 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
P2006 fault code on Audi indicates an issue with the intake manifold runner control circuit.
- P2006 in an Audi can be caused by a Faulty Intake Manifold Runner Position Sensor.
- An open or shorted Intake Manifold Runner Position Sensor harness.
- A poor electrical connection in the Intake Manifold Runner Position Sensor circuit.
- Or a Faulty Intake Manifold Runner Control Solenoid Valve.
Fixing Audi Error Code p2006 Step By Step
Address the intake manifold runner control stuck closed condition indicated by Audi P2006 fault code.
- To fix Audi OBDII code P2006, start by reviewing the possible causes mentioned above.
- Visually examine the intake manifold runner control (IMRC) system for any signs of damage or wear.
- Check the wiring harness and connectors related to the IMRC system for any issues.
- Inspect the IMRC actuator for proper operation and make sure it moves freely.
- Clean the IMRC system components if any carbon buildup is present.
- Reset the vehicle’s engine control module (ECM) to clear the fault code and see if it returns.
- If the code persists, consider replacing the IMRC actuator or addressing any internal mechanical issues within the intake manifold.
Cost Of Fixing Audi p2006 Fault Code
The repair for Audi fault code P2006 typically involves replacing the intake manifold runner control.
The cost to diagnose and fix Audi OBD code P2006 is typically based on 1. 0 hour of labor, with rates ranging from $75 to $150 per hour.
The total cost will depend on shop rates, complexity of the issue, and any additional parts or services needed.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Audi p2006 OBD Code
Audi fault code P2006 relates to a stuck closed intake manifold runner control circuit.
Code P2006 for Audi means that the intake manifold runner control stuck closed for bank 1. This code is triggered by the Engine Control Module (ECM) when it detects that the intake manifold runner control is not functioning properly.
The intake manifold runner control is responsible for adjusting the length of the intake runners to optimize engine performance at different RPMs.
When it gets stuck closed, it can affect engine performance and fuel efficiency.
Mechanic’s Tech Notes
Detailed information on Audi fault code P2006, including symptoms, causes, and repair procedures.
To diagnose and fix OBDII code P2006 on an Audi, start by visually inspecting the wiring harness and connectors related to the intake manifold runner control circuit.
Look for any damage or corrosion on the components and connector pins.
Use a voltmeter to check the power and ground connections to the intake manifold runner control module.
Additionally, use a scan tool to monitor the module’s response over the Controller Area Network (CAN) network.
If necessary, consider reprogramming or reflashing the module to address the issue.
FAQ
Common causes of OBD code P2006 in an Audi: Faulty Intake Manifold Runner Position Sensor, sensor harness issues, poor electrical connection, faulty Intake Manifold Runner Control Solenoid Valve.
Diagnose and fix OBD code P2006 in your Audi by checking the intake manifold runner position sensor, harness, and connections for faults or damage.
It is not safe to continue driving with OBD code P2006 in your Audi. Check intake manifold runner position sensor and related components for issues immediately.
Wrap Up
If your Audi is displaying OBD code p2006, you may experience rough idling, reduced engine performance, or even stalling.
This code typically indicates an issue with the intake manifold runner control circuit, such as a faulty intake manifold runner control solenoid, damaged wiring, or a poor connection.
To address Audi OBD code p2006, start by inspecting the wiring harness and connectors related to the intake manifold runner control system.
Test the intake manifold runner control solenoid for proper operation and replace if necessary.
Ensure all connections are secure and free of corrosion to resolve this fault
