The OBD code P0118 for Audi indicates a problem with the Engine Coolant Temperature (ECT) sensor circuit.
Symptoms include the Engine Light being ON.
Causes may include low coolant level, a faulty ECT sensor, or issues with the sensor’s wiring.
This issue is moderately serious as it can affect engine performance.
A possible fix is to inspect and repair any damaged components or wiring related to the ECT sensor.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
Symptoms of the Audi p0118 OBD Code
The Audi P0118 fault code indicates an issue with the engine coolant temperature sensor circuit.
- Symptoms: Engine Light ON.
- Temperature gauge reading extremely high.
- Loss of power during acceleration.
- Engine may run rough or stall.
Causes of the Audi p0118 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
P0118 in an Audi is typically triggered by a high engine coolant temperature sensor signal.
- P0118 can be caused by low engine coolant level.
- Faulty Engine Coolant Temperature (ECT) sensor.
- Faulty engine coolant thermostat.
- Engine Coolant Temperature (ECT) sensor harness is open or shorted.
- Engine Coolant Temperature (ECT) sensor electrical circuit poor connection.
Fixing Audi Error Code p0118 Step By Step
Address the high engine coolant temperature issue indicated by Audi fault code P0118.
- To fix Audi OBDII code P0118, first, review the possible causes related to the engine coolant temperature (ECT) sensor circuit.
- Visually inspect the wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the ECT sensor using a multimeter to ensure it is functioning correctly.
- Replace the ECT sensor if it is faulty.
- Clear the fault codes using an OBDII scanner and test drive the vehicle to verify the repair.
Cost Of Fixing Audi p0118 Fault Code
The repair for Audi fault code P0118 typically involves diagnosing and replacing the Engine Coolant Temperature (ECT) sensor.
The cost to diagnose and fix an Audi OBD code P0118 typically ranges from $75 to $150 per hour for labor rates.
With an estimated repair time of 1. 0 hour, the total cost could be around $75 to $150, depending on shop rates and the complexity of the issue.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Audi p0118 OBD Code
Audi P0118 indicates a high engine coolant temperature sensor signal.
OBD code P0118 for Audi vehicles indicates an issue with the Engine Coolant Temperature (ECT) sensor circuit.
This code is triggered when the ECT sensor reports a temperature that is too high or unrealistic for the current operating conditions.
The ECT sensor plays a crucial role in providing the Engine Control Module (ECM) with accurate temperature data to adjust fuel delivery and ignition timing.
When the ECM detects a signal from the ECT sensor that is outside of the expected range, it will trigger code P0118 and illuminate the Check Engine Light on the dashboard.
This code can lead to drivability issues, poor fuel economy, and potential engine overheating if left unresolved.
It is essential to inspect the ECT sensor, its wiring harness, and the connector for any signs of damage or corrosion.
Testing the sensor’s resistance and comparing it to specifications can help determine if the sensor is faulty.
Additionally, checking the coolant level and ensuring proper coolant circulation is crucial in diagnosing this code accurately.
Mechanic’s Tech Notes
Detailed information on diagnosing and repairing fault code P0118 in Audi vehicles.
To diagnose Audi OBDII code P0118, use a voltmeter to test the Engine Coolant Temperature (ECT) sensor’s resistance and voltage.
Ensure the sensor is functioning correctly by comparing its readings with manufacturer specifications.
Check the wiring harness and connectors for any damage or corrosion.
Use a scan tool to monitor ECT sensor data while the engine is running to confirm proper operation.
If the sensor readings are out of range, consider replacing the ECT sensor.
Additionally, inspect the cooling system for any issues that may affect sensor performance.
FAQ
Common causes of OBD code P0118 in an Audi: Low coolant level, faulty ECT sensor, faulty thermostat, open/shorted ECT sensor harness, poor electrical connection.
Diagnose P0118 in Audi: Check coolant level, ECT sensor, thermostat, harness. Inspect wiring for damage, connector pins for issues. Fix as needed.
It is not safe to continue driving with OBD code P0118 in your Audi. Check coolant level, ECT sensor, thermostat, wiring harness, and connectors for issues.
Wrap Up
If your Audi is displaying OBD code p0118 along with temperature gauge reading high, it could indicate a faulty Engine Coolant Temperature (ECT) sensor, wiring issues, or low coolant level.
The ECT sensor measures coolant temperature and sends signals to the engine control module.
To address Audi OBD code p0118, check the ECT sensor and its wiring for any damage or corrosion.
Test the sensor’s resistance and ensure proper connection at the sensor and engine control module.
Replace the ECT sensor if necessary to restore accurate temperature readings.
