The OBD code P060A for Acura indicates an internal failure within the Powertrain Control Module (PCM).
This affects the engine management system.
Symptoms include the Engine Light being illuminated.
The issue is serious as it can lead to drivability problems.
To fix it, inspect the PCM wiring harness and connectors for any damage or corrosion, and check for broken or bent pins.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Acura p060a OBD Code
The vehicle may experience drivability issues and the Check Engine light may illuminate with fault code P060A.
- Symptoms: Engine Light ON.
- Vehicle may experience rough idling.
- Engine may stall unexpectedly.
- Transmission shifting may feel erratic.
- Vehicle may go into limp mode.
Causes of the Acura p060a OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Acura fault code P060A include issues with the internal control module processor.
- P060A can be caused by a Powertrain Control Module (PCM) internal failure
Fixing Acura Error Code p060a Step By Step
To address fault code P060A on an Acura, reprogram the powertrain control module (PCM) with updated software.
- To fix the Acura OBDII code p060a, start by reviewing the possible causes mentioned above.
- Visually examine the corresponding wiring harness and connectors for any damage.
- Inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no issues are found with the wiring and connectors, consider reprogramming or replacing the powertrain control module (PCM) as necessary.
Cost Of Fixing Acura p060a Fault Code
The repair for Acura fault code P060A may involve replacing the internal control module processor.
The cost to diagnose and fix the Acura OBD code P060A typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
Costs may vary based on shop rates, complexity of the issue, and any additional parts or labor needed for the repair.
Details of the Acura p060a OBD Code
Fault code P060A in Acura indicates an internal control module monitoring processor performance issue.
Acura OBD code P060A means Internal Control Module Monitoring Processor Performance.
This code is triggered when the Engine Control Module (ECM) detects that the processor’s performance is not within the normal range.
The ECM constantly monitors the performance of its internal processor to ensure proper operation of the vehicle’s systems.
If the processor performance deviates from the expected parameters, the ECM will set code P060A.
This code typically indicates a fault within the ECM itself and may require ECM replacement or reprogramming to resolve the issue.
Mechanic’s Tech Notes
Detailed information on fault code P060A for Acura vehicles is provided below.
To diagnose and fix OBDII code P060A in an Acura, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Additionally, visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.
This thorough inspection will help identify and address any issues causing the P060A fault code.
FAQ
Common symptoms for OBD code P060A in an Acura include the Engine Light ON due to Powertrain Control Module (PCM) Internal Failure. Inspect wiring and connectors for damage.
Diagnose OBD code P060A in Acura by checking PCM internal failure. Inspect wiring harness, connectors, and pins for damage or corrosion.
To fix OBD code P060A (PCM Internal Failure), visually inspect wiring harness, connectors, and pins for damage or corrosion. Repair or replace as needed.
Wrap Up
If your Acura is displaying OBD code P060A, you may experience issues such as rough idling, stalling, or poor acceleration.
This code typically indicates a malfunction in the internal control module processor.
Possible causes include a faulty powertrain control module (PCM), damaged wiring harness, or poor electrical connection.
To address Acura OBD code P060A, start by inspecting the PCM wiring harness for any signs of damage or corrosion.
Check the connectors for a secure fit and proper contact.
If no visible issues are found, consider consulting a professional to diagnose and potentially replace the PCM
