[SOLVED] U2617 Code: How To Reconnect Battery Energy Control Module

The automobile fault code U2617 indicates a problem with the HybridEV Battery Interface Control Module 5 or the Battery Energy Control Module. The symptom is an illuminated Engine Light or Service Engine Soon Warning Light.

The cause could be a faulty module, an open or shorted harness, or a poor electrical connection. The importance of repairing this issue lies in the fact that it affects the performance of the hybrid or electric vehicle.

The repair difficulty is moderate, with a repair time of 1.0. To fix the problem, one should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Decoding U2617: Common Symptoms Of This Fault Code

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the u2617 fault code.

Here are the symptoms to look out for:

• The automobile fault code U2617 has the following symptoms: Engine Light ON, Service Engine Soon Warning Light.

Decoding U2617: Common Causes Of The Fault Code

The automobile fault code u2617 can be caused by various issues, including a faulty battery control module and poor electrical connections.

• The automobile fault code U2617 can be caused by a faulty Hybrid/EV Battery Interface Control Module 5.
• It can also be caused by an open or shorted Hybrid/EV Battery Interface Control Module 5 harness.
• Another cause can be a poor electrical connection in the Hybrid/EV Battery Interface Control Module 5 circuit.
• Lastly, a faulty Battery Energy Control Module can also trigger this fault code.

Fix U2617 Code: Simple Steps To Get Your Car Running

Below are some possible fixes for the automobile fault code u2617, including inspecting wiring harness and connectors for damage or corrosion.

• To fix the automobile fault code u2617, first, check the possible causes listed above.
• Then, visually inspect the related wiring harness and connectors.
• Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
• This fix will take an estimated repair time of 1.0 hour.

Cracking The Code: U2617 Repair Cost & Complexity

The automobile fault code U2617 has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time. Most auto repair shops charge between $75 and $150 per hour for their services.

Therefore, the fixing cost of U2617 will depend on the hourly rate charged by the repair shop. It is important to consider the repair time and cost when diagnosing and fixing this fault code.

Unlocking The Mystery Of U2617 Fault Code

The u2617 fault code indicates a communication problem between the Battery Energy Control Module and HybridEV Battery Interface Control Module 5. Devices connected to the serial data circuits monitor for serial data communications during normal vehicle operation. The scan tool cannot communicate with the HybridEV Battery Interface Control Modules 5 on Battery Energy Control Module dedicated bus.

The DTC will set when there is no temperature report message from HybridEV Battery Interface Control Modules 5 to Battery Energy Control Module within 4s.

FAQ

Wrap Up

If your engine light is on, it could be due to a faulty HybridEV Battery Interface Control Module 5 or a poor electrical connection. To fix it, visually inspect the wiring harness and connectors for damage or corrosion.

Check for broken or bent pins.

Resources

• Resource 1
• Resource 2
• Resource 3
• Resource 4