[SOLVED] U1729 Code: Fixing Right Headlamp Motor Communication Error

The automobile fault code U1729 indicates a problem with the right headlamp horizontal motor or its related components. The most common symptom is the illumination of the engine light or service engine soon warning light. The cause of this fault code could be a faulty right headlamp horizontal motor, an open or shorted harness, a poor electrical connection in the circuit, or a faulty right high beam control module.

The importance of repairing this issue lies in ensuring proper functioning of the headlamp, which is crucial for safe driving. The repair difficulty is moderate, with a repair time of 1.0. To fix the issue, one should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the u1729 fault code.

Here are the symptoms to look out for:

  • The fault code U1729 in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include issues with the transmission, such as difficulty shifting gears or the transmission slipping.
  • The vehicle may also experience a decrease in power or acceleration, and the engine may stall or hesitate during operation.
  • Additionally, the vehicle may experience issues with the brakes, such as reduced braking power or a spongy brake pedal.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code u1729 can be caused by various factors, including a faulty headlamp motor and poor electrical connections.

  • The automobile fault code U1729 can be caused by a faulty right headlamp horizontal motor.
  • It can also be caused by an open or shorted harness of the right headlamp horizontal motor.
  • Another cause can be a poor electrical connection in the right headlamp horizontal motor circuit.
  • Lastly, a faulty right high beam control module can also trigger the U1729 fault code.

To fix the u1729 automobile fault code, check the possible causes and inspect the wiring harness, connectors, and components for damage.

  • To fix the automobile fault code u1729, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code U1729 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of fixing the U1729 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The U1729 code is related to the Local Interconnect Network (LIN) Bus. It occurs when there is a loss of serial data communication between the Right High Beam Control Module and the Right Headlamp Horizontal Motor. This code is set by the master control module when a supervised periodic message is not received.

The Diagnostic Trouble Code (DTC) indicates that there is no communication between the two LIN devices on the LIN bus network.

What are the possible causes of the u1729 automobile fault code?

If you’re experiencing the u1729 automobile fault code, your engine light may be on. This could be due to a faulty right headlamp horizontal motor, an open or shorted harness, a poor electrical connection in the right headlamp horizontal motor circuit, or a faulty right high beam control module. To fix the issue, check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

How can I visually inspect the related wiring harness and connectors to fix the u1729 fault code?

If you’re experiencing the u1729 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may need to visually inspect the related wiring harness and connectors. This fault code can be caused by a faulty Right Headlamp Horizontal Motor, an open or shorted Right Headlamp Horizontal Motor harness, a poor electrical connection in the Right Headlamp Horizontal Motor circuit, or a faulty Right High Beam Control Module. To fix the issue, check the possible causes listed above and visually inspect the wiring harness and connectors for any damage or corrosion. Look for broken, bent, pushed out, or corroded connector’s pins.

What are the steps to take if I find broken, bent, pushed out, or corroded connector’s pins while fixing the u1729 fault code?

If you find broken, bent, pushed out, or corroded connector’s pins while fixing the u1729 fault code, start by visually inspecting the related wiring harness and connectors. Check for damaged components and look for any signs of damage to the pins. If you find any issues, replace the damaged pins or connectors as necessary. This will help ensure that the Right Headlamp Horizontal Motor circuit has a good electrical connection and can function properly, which should resolve the engine light or service engine soon warning light.

u1729 error fault code explained

If your engine light is on, it could be due to a faulty right headlamp horizontal motor or a poor electrical connection. Check the wiring harness and connectors for damage or corrosion.

Look for broken, bent, pushed out, or corroded connector’s pins. Check the right high beam control module as well.

Scroll to Top