The automobile fault code U1188 indicates a problem with a module that is not communicating properly. This can cause the engine light to turn on, indicating a need for service. The cause of this issue could be a faulty module, an open or shorted module harness, or a poor electrical connection in the module circuit.

It is important to visually inspect the wiring harness and connectors for any damage or corrosion.

The repair time for this issue is estimated to be around 1.0, and it is crucial to address this problem promptly to avoid further damage to the vehicle.

To interpret the fault code, it is recommended to check the “Possible Causes” listed above and inspect the related components thoroughly.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the u1188 fault code. Here are the symptoms to look out for:

  • The U1188 fault code in an automobile can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON, issues with the transmission, problems with the ABS system, issues with the traction control system, problems with the stability control system, and issues with the cruise control system.
  • It is important to get this fault code diagnosed and fixed as soon as possible to avoid further damage to the vehicle.

The automobile fault code u1188 can be caused by a faulty module, open or shorted module harness, or poor electrical connection.

  • The automobile fault code U1188 can be caused by a faulty module that is not communicating.
  • It can also be caused by an open or shorted module harness.
  • Additionally, a poor electrical connection in the module circuit can also trigger this fault code.
  • These are the three main causes of the U1188 fault code in automobiles.

To fix the u1188 automobile fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code u1188, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code U1188 indicates a communication error between the vehicle’s engine control module and the fuel injection control module.

The estimated repair time for this fault code is 1.0 hour. The cost of fixing this fault code is influenced by the hourly rate charged by the auto repair shop, which is typically between $75 and $150 per hour. Other factors that may affect the cost of fixing this fault code include the severity of the issue, the type of vehicle, and the availability of replacement parts.

The U1188 code is related to the class 2 serial data circuit in automobiles.

Modules in the circuit monitor for serial data communications during normal vehicle operation. When a module does not associate an identification number with at least one critical parameter within 5 seconds of beginning serial data communication, the U1188 Diagnostic Trouble Code (DTC) is set.

The code indicates that there is invalid or missing data for Primary I.

What are the possible causes of the u1188 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the u1188 fault code. This code is usually caused by a faulty module that is not communicating, an open or shorted module harness, or a poor electrical connection in the module circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the u1188 fault code?

If you’re experiencing the u1188 fault code, which is indicated by the engine light being on or the service engine soon warning light, there are a few things you can do to fix it. The cause of this issue could be a faulty module that is not communicating, an open or shorted module harness, or a poor electrical connection in the module circuit. To fix this, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

What are the consequences of ignoring the u1188 fault code?

Ignoring the U1188 fault code can lead to serious consequences such as reduced engine performance, increased fuel consumption, and potential damage to other engine components. The fault code indicates a faulty module that is not communicating, an open or shorted module harness, or poor electrical connection. It is important to visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins to fix the issue.

u1188 error fault code explained

If your engine light is on due to a faulty module or poor electrical connection, visually inspect the wiring harness and connectors for damage or corrosion. Check for broken, bent, or pushed out pins.

Take action to fix the issue as soon as possible.

Scroll to Top