[SOLVED] U0317 Code: Fixing Software Incompatibility With Park Brake Control

The automobile fault code U0317 indicates a problem with the Park Brake Control Module, which can cause the engine light to turn on.

This fault code can be caused by the module being programmed with incorrect software or a faulty module. It is important to address this issue promptly as it can affect the vehicle’s braking system. The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins.

The repair time for this issue is estimated to be around 1.0 hour. To interpret the fault code, it is recommended to check the “Possible Causes” listed above.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON, it could be a sign of the u0317 fault code.

Here are some symptoms to look out for:

  • The U0317 fault code in an automobile can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON, issues with the transmission, problems with the fuel system, difficulty starting the engine, rough idling, stalling, reduced power, and decreased fuel efficiency.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving.

There are various causes of the automobile fault code u0317, including incorrect software programming and faulty control modules.

  • The automobile fault code U0317 can be caused by a park brake control module programmed with incorrect software.
  • Another cause of this fault code is a faulty park brake control module.
  • These are the only two known causes of the U0317 fault code.

Below are some possible fixes for the automobile fault code u0317, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code u0317, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code U0317 can be diagnosed and fixed within an estimated repair time of 1.0 hour.

The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of diagnosis and fixing the U0317 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The U0317 fault code is related to the Park Brake Control Module. This fault code occurs when a device is not properly configured after installation. The device may require specific software, serial numbers, or vehicle options to function correctly.

No external circuit diagnosis is involved in this fault code.

The U0317 code indicates a software incompatibility with the Park Brake Control Module.

What are the possible causes of the u0317 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the u0317 fault code. This code is caused by a park brake control module programmed with incorrect software or a faulty park brake control module. To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the u0317 fault code?

If you’re experiencing the U0317 fault code, which is indicated by the engine light or service engine soon warning light turning on, there are a few things you can do to fix it. Firstly, check the possible causes, which include a park brake control module programmed with incorrect software or a faulty park brake control module. To visually inspect the related wiring harness and connectors, look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

What are the signs of damaged components that one should look for when fixing the u0317 fault code?

If you’re dealing with the u0317 fault code, you may notice that the engine light is on or the service engine soon warning light is illuminated. This could be caused by a park brake control module programmed with incorrect software or a faulty park brake control module. To fix the issue, start by checking the possible causes listed above and visually inspecting the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

u0317 error fault code explained

If your engine light is on, it could be due to an incorrectly programmed park brake control module or a faulty one.

Check the wiring harness and connectors for damage and inspect the pins for corrosion.

For more information, refer to the “Possible Causes” listed above.

Scroll to Top