[SOLVED] U0292 Code: How To Fix Lost Communication With Drive Motor

The automobile fault code U0292 indicates a problem with the Drive Motor Control Module ‘B’ in the vehicle.

This can cause the engine light to turn on, indicating a need for service. The cause of this issue could be a faulty module, an open or shorted harness, or a poor electrical connection in the circuit. It is important to visually inspect the wiring harness and connectors for any damage or corrosion.

The repair time for this issue is estimated to be around 1.0, and it is crucial to address this problem promptly to avoid further damage to the vehicle. To interpret the fault code, it is recommended to check the possible causes listed above and inspect the related components thoroughly.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON, it could be due to the u0292 fault code. Here are some symptoms to look out for:

  • The automobile fault code U0292 has the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.

The automobile fault code u0292 can be caused by a faulty module or poor electrical connection.

  • The automobile fault code u0292 can be caused by a faulty Drive Motor Control Module ‘B’.
  • It can also be caused by an open or shorted harness in the Drive Motor Control Module ‘B’.
  • Additionally, a poor electrical connection in the Drive Motor Control Module ‘B’ circuit can also trigger this fault code.

Below are some possible fixes for the automobile fault code u0292, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code u0292, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code U0292 has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time. Most auto repair shops charge between $75 and $150 per hour for their services.

Therefore, the fixing cost of U0292 will range between $75 and $150, depending on the repair time required.

The U0292 code is a Diagnostic Trouble Code (DTC) that sets when a periodic message from the Drive Motor Control Module ‘B’ has not been received.

The code indicates that there is a communication problem between the Drive Motor Control Module ‘B’ and the Controller Area Network (CAN) bus. The CAN bus is a vehicle bus standard designed to interconnect automotive devices without a host computer.

The CAN bus uses two dedicated wires for communication, and when data bits are being transmitted, the CAN high line goes to 3.75V, and the CAN low drops to 1.25V, thereby generating a 2.5V differential between the lines.

What are the possible causes of the u0292 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the u0292 automobile fault code. This code is caused by a faulty Drive Motor Control Module ‘B’, an open or shorted harness, or a poor electrical connection in the circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the u0292 fault code?

If you’re experiencing the u0292 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you can fix it by visually inspecting the related wiring harness and connectors. This fault code is caused by a faulty Drive Motor Control Module ‘B’, an open or shorted harness, or a poor electrical connection in the circuit. To fix it, check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

What are the consequences of ignoring the u0292 fault code?

Ignoring the u0292 fault code can lead to serious consequences such as reduced engine performance, decreased fuel efficiency, and potential damage to other engine components. The fault code indicates a problem with the Drive Motor Control Module ‘B’, its harness, or electrical connection. It is important to visually inspect the related wiring harness and connectors, and check for damaged components to avoid further damage.

u0292 error fault code explained

If your engine light is on, it could be due to a faulty Drive Motor Control Module ‘B’, an open or shorted harness, or poor electrical connection. Visually inspect the wiring harness and connectors for damage or corrosion. Check for broken, bent, or pushed out pins.

Scroll to Top