If you see the engine light on or the service engine soon warning light, it could be due to the automobile fault code U0189. This code indicates a problem with the Digital Disc PlayerChanger Module ‘C’ or its related wiring harness and connectors.

The cause could be a faulty module, an open or shorted harness, or a poor electrical connection. It is important to address this issue promptly as it could affect the performance of your vehicle.

The repair time for this fault code is estimated at 1.0.

To fix the problem, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of the u0189 fault code. Here are some symptoms to look out for:

  • The U0189 fault code in an automobile can cause the following symptoms: – The engine light will turn on or the service engine soon warning light will appear.
  • – The vehicle may experience a decrease in fuel efficiency.
  • – The transmission may shift roughly or erratically.
  • – The speedometer may not function properly.
  • – The vehicle may experience a loss of power or acceleration.
  • – The engine may stall or hesitate during acceleration.
  • – The vehicle may experience difficulty starting.
  • – The cruise control may not function properly.
  • – The anti-lock brake system (ABS) warning light may turn on.

The automobile fault code u0189 can be caused by various factors such as a faulty digital disc player or a poor electrical connection.

  • The automobile fault code U0189 can be caused by a faulty Digital Disc Player/Changer Module ‘C’.
  • It can also be caused by an open or shorted harness of the Digital Disc Player/Changer Module ‘C’.
  • Additionally, a poor electrical connection in the circuit of the Digital Disc Player/Changer Module ‘C’ can also trigger the U0189 fault code.

To fix the u0189 automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.

  • To fix the automobile fault code u0189, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code U0189 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.

Therefore, the total cost of diagnosis and fixing the U0189 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.

The U0189 code is a Controller Area Network (CAN) fault code. CAN is a vehicle bus standard designed to interconnect automotive devices without a host computer.

CAN bus uses two dedicated wires for communication, CAN high and CAN low. The U0189 code sets when a periodic message from the Digital Disc PlayerChanger Module ‘C’ has not been received.

The code indicates that there is a lost communication with the Digital Disc PlayerChanger Module ‘C’.

What are the possible causes of the u0189 fault code that triggers the engine light or service engine soon warning light?

If you see the engine light or service engine soon warning light on your dashboard, it could be due to the u0189 fault code. This code is usually caused by a faulty Digital Disc Player/Changer Module ‘C’, an open or shorted harness, or a poor electrical connection in the circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the wiring harness and connectors related to the Digital Disc Player/Changer Module ‘C’ to fix the u0189 fault code?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to a u0189 fault code, it may be caused by a faulty Digital Disc Player/Changer Module ‘C’, an open or shorted harness, or a poor electrical connection. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. Be sure to check the “Possible Causes” listed above to ensure you’re addressing all potential issues.

What are the signs of damaged components or broken, bent, pushed out, or corroded connector’s pins that I should look for when fixing the u0189 fault code?

If you’re dealing with a u0189 fault code, keep an eye out for the engine light turning on or the service engine soon warning light. The cause of this issue could be a faulty Digital Disc Player/Changer Module ‘C’, an open or shorted harness, or a poor electrical connection in the circuit. To fix this problem, check the possible causes listed above and visually inspect the related wiring harness and connectors. Be sure to look for damaged components and any broken, bent, pushed out, or corroded connector’s pins.

u0189 error fault code explained

If your engine light is on and showing the u0189 code, it may be due to a faulty Digital Disc PlayerChanger Module ‘C’, an open or shorted harness, or poor electrical connection. To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Scroll to Top