[SOLVED] U0188 Code: Fixing Lost Communication With Digital Disc Player

If you see the engine light on or the service engine soon warning light, it could be due to the automobile fault code U0188. This code indicates a problem with the Digital Disc PlayerChanger Module ‘B’ or its related wiring harness and connectors.

The cause could be a faulty module, an open or shorted harness, or a poor electrical connection.

The repair importance is moderate, and the difficulty level is low.

To fix the issue, you need to visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

The repair time is estimated to be around 1.0 hour.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the u0188 fault code. Here are the symptoms to look out for:

  • The U0188 fault code in an automobile can cause the following symptoms: – The engine light will turn on or the service engine soon warning light will appear.
  • – The vehicle may experience a decrease in fuel efficiency.
  • – The transmission may shift roughly or erratically.
  • – The speedometer may not function properly.
  • – The vehicle may experience a loss of power or acceleration.
  • – The engine may stall or hesitate during acceleration.
  • – The vehicle may experience difficulty starting.
  • – The cruise control may not function properly.
  • – The anti-lock brake system (ABS) warning light may turn on.

The automobile fault code u0188 can be caused by various factors, including a faulty digital disc playerchanger module, open or shorted harness, and poor electrical connection in the circuit.

  • The automobile fault code U0188 can be caused by a faulty Digital Disc Player/Changer Module ‘B’.
  • It can also be caused by an open or shorted harness of the Digital Disc Player/Changer Module ‘B’.
  • Additionally, a poor electrical connection in the circuit of the Digital Disc Player/Changer Module ‘B’ can also trigger the U0188 fault code.

Below are the possible fixes for the automobile fault code u0188, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code u0188, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • All of these issues need to be fixed to resolve the fault code.
  • The estimated repair time for this fix is 1.0 hour.

The automobile fault code U0188 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.

Therefore, the total cost of diagnosis and fixing the U0188 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.

The U0188 code is a Controller Area Network (CAN) fault code. CAN is a vehicle bus standard designed to interconnect automotive devices without a host computer. The code sets when a periodic message from the Digital Disc PlayerChanger Module ‘B’ has not been received.

CAN bus uses two dedicated wires for communication, CAN high and CAN low.

The Diagnostic Trouble Code (DTC) sets when there is a loss of communication with the Digital Disc PlayerChanger Module ‘B’. The CAN bus is not sensitive to inductive spikes, electrical fields, or other noise.

What are the possible causes of the u0188 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the u0188 fault code. This code is caused by a faulty digital disc player/changer module ‘B’, an open or shorted harness, or a poor electrical connection in the module circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the wiring harness and connectors related to the Digital Disc Player/Changer Module ‘B’?

If you’re experiencing an illuminated Engine Light or Service Engine Soon Warning Light, it could be due to a faulty Digital Disc Player/Changer Module ‘B’, an open or shorted harness, or poor electrical connection. To fix this issue, start by visually inspecting the wiring harness and connectors related to the module. Check for any damaged components and look for broken, bent, pushed out, or corroded connector pins.

What should I do if I find damaged components or broken, bent, pushed out, or corroded connector’s pins while inspecting the wiring harness and connectors?

If you find damaged components or broken, bent, pushed out, or corroded connector’s pins while inspecting the wiring harness and connectors, it could be the cause of a faulty Digital Disc Player/Changer Module ‘B’. To fix this issue, check the “Possible Causes” listed above and visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

u0188 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light with the fault code u0188, check the Digital Disc PlayerChanger Module ‘B’ and its related wiring harness and connectors for any damage or poor electrical connection. Look for broken, bent, pushed out, or corroded connector’s pins.

Scroll to Top