[SOLVED] Fixing U0132: Communication Loss With Suspension Control Module

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the automobile fault code: u0132. This code indicates a problem with the Suspension Control Module ‘A’.

The possible causes include a faulty module, an open or shorted harness, or a poor electrical connection.

To fix the issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

The repair time for this fault code is 1.0.

It’s important to interpret the fault code correctly to ensure that the issue is fixed properly.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON, it could be a sign of u0132 fault code. Here are the symptoms to look out for:

  • The automobile fault code U0132 has the following symptoms: – Engine Light ON (or Service Engine Soon Warning Light) – Loss of communication with the vehicle dynamics control module – Malfunction of the instrument cluster – Malfunction of the powertrain control module – Malfunction of the anti-lock brake system – Malfunction of the traction control system – Malfunction of the cruise control system – Malfunction of the climate control system – Malfunction of the audio system – Malfunction of the navigation system.

The automobile fault code u0132 can be caused by a faulty suspension control module, open or shorted harness, or poor electrical connection.

  • The automobile fault code U0132 can be caused by a faulty Suspension Control Module ‘A’.
  • It can also be caused by an open or shorted harness of the Suspension Control Module ‘A’.
  • Additionally, a poor electrical connection in the circuit of the Suspension Control Module ‘A’ can also trigger this fault code.

Below are some possible fixes for the automobile fault code u0132, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code u0132, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code U0132 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.

Therefore, the total cost of diagnosis and fixing the U0132 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time.

The U0132 code is a Diagnostic Trouble Code (DTC) that sets when a periodic message from the Suspension Control Module ‘A’ has not been received. The Suspension Control Module ‘A’ is responsible for controlling the suspension system of the vehicle. The U0132 code indicates that there is a communication problem between the Suspension Control Module ‘A’ and the other modules in the vehicle.

This code can cause the suspension system to malfunction, resulting in a rough ride and poor handling.

If you receive the U0132 code, it is important to have your vehicle diagnosed and repaired by a qualified mechanic as soon as possible to avoid further damage.

What are the possible causes of the u0132 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the u0132 fault code. This code is usually caused by a faulty Suspension Control Module ‘A’, an open or shorted harness, or a poor electrical connection in the circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the u0132 fault code?

If you’re experiencing an engine light or service engine soon warning light due to a u0132 fault code, there are a few things you can do to fix it. First, check for a faulty Suspension Control Module ‘A’, an open or shorted harness, or a poor electrical connection in the circuit. To visually inspect the related wiring harness and connectors, look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. By doing so, you can identify the issue and take the necessary steps to fix it.

What are the signs of damaged components that one should look for when fixing the u0132 fault code?

If you’re dealing with a u0132 fault code, keep an eye out for the engine light turning on or the service engine soon warning light. These are the primary symptoms of a faulty Suspension Control Module ‘A’, an open or shorted harness, or poor electrical connection in the circuit. To fix the issue, inspect the wiring harness and connectors for any damage, such as broken, bent, pushed out, or corroded pins. Check the possible causes listed above to identify the root of the problem.

u0132 error fault code explained

If your engine light is on, it could be due to a faulty Suspension Control Module ‘A’, an open or shorted harness, or poor electrical connection. Visually inspect the wiring harness and connectors for damage or corrosion.

Check for broken, bent, or pushed out connector pins.

Scroll to Top