[SOLVED] U0130 Code: Fixing Lost Communication With Steering Control Module

The automobile fault code U0130 indicates a problem with the Steering Effort Control Module. The most common symptom is the Engine Light ON or Service Engine Soon Warning Light. The cause of this fault code could be a faulty module, an open or shorted harness, or a poor electrical connection.

It is important to visually inspect the related wiring harness and connectors for any damage or corrosion. The repair time for this fault code is 1.0, and the fix involves checking the possible causes listed above and looking for broken or bent connector pins. Understanding and interpreting fault codes is crucial for maintaining the health of your vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON, it could be a sign of u0130 fault code.

Here are the symptoms to look out for:

  • The U0130 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include issues with the vehicle’s transmission, problems with the anti-lock brake system, and difficulty starting the engine.
  • Additionally, the vehicle’s speedometer may not work correctly, and the cruise control may not function as intended.
  • It is essential to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The automobile fault code u0130 can be caused by a faulty module, open or shorted harness, or poor electrical connection.

  • The automobile fault code u0130 can be caused by a faulty Steering Effort Control Module.
  • It can also be caused by an open or shorted Steering Effort Control Module harness.
  • Additionally, a poor electrical connection in the Steering Effort Control Module circuit can also trigger this fault code.

To fix the u0130 automobile fault code, check the possible causes and inspect the related wiring harness, connectors, and components for damage.

  • To fix the automobile fault code u0130, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code U0130 diagnosis and fixing cost is influenced by several factors.

The estimated repair time for this code is 1.0 hour. The cost of repair is commonly charged between $75 and $150 per hour by most auto repair shops. These factors play a significant role in determining the overall cost of fixing the U0130 fault code.

The U0130 fault code is related to the Controller Area Network (CAN) in a vehicle.

CAN is a bus standard that connects automotive devices without a host computer.

CAN bus uses two wires for communication, CAN high and CAN low.

When the CAN bus is in idle mode, both lines carry 2.5V. The U0130 code sets when a periodic message from the Steering Effort Control Module has not been received. This code indicates that there is a communication problem between the Steering Effort Control Module and other devices on the CAN bus.

What are the possible causes of the u0130 automobile fault code?

If your engine light is on and you’re seeing the u0130 fault code, it could be due to a faulty Steering Effort Control Module, an open or shorted harness, or poor electrical connection in the module circuit. To fix the issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.

How can one visually inspect the related wiring harness and connectors to fix the u0130 fault code?

If you’re experiencing the u0130 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, there are a few things you can do to fix it. The cause of this issue could be a faulty Steering Effort Control Module, an open or shorted harness, or a poor electrical connection in the circuit. To address this problem, you should visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. This will help you identify the issue and take the necessary steps to fix it.

What are the signs that the Steering Effort Control Module harness is open or shorted, causing the u0130 fault code?

If the engine light is on or the service engine soon warning light is illuminated, it could be a sign of a faulty Steering Effort Control Module or an open or shorted harness. To fix this issue, it is recommended to visually inspect the related wiring harness and connectors for any damage or corrosion. Additionally, check for broken, bent, or pushed out connector pins.

u0130 error fault code explained

If your engine light is on, it could be due to a faulty steering effort control module, an open or shorted harness, or poor electrical connection.

To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Scroll to Top