The automobile fault code U0117 indicates a problem with the PTO Control Module, which can cause the engine light to turn on.
The possible causes of this fault code include a faulty PTO Control Module, an open or shorted PTO Control Module harness, or poor electrical connection in the PTO Control Module circuit. To fix this issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins. The repair time for this issue is estimated to be 1.0.
It is important to interpret the fault code correctly to ensure that the issue is fixed properly.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Unresponsive Speedometer? U0117 Could Be The Culprit
If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be a sign of u0117 fault code.
Here are the symptoms to look out for:
- The automobile fault code u0117 has the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.
Decoding U0117: Common Causes Of The Fault Code
The automobile fault code u0117 can be caused by a faulty PTO Control Module, open or shorted harness, or poor electrical connection.
- The automobile fault code u0117 can be caused by a faulty PTO Control Module.
- It can also be caused by an open or shorted PTO Control Module harness.
- Additionally, a poor electrical connection in the PTO Control Module circuit can also trigger this fault code.
Fix U0117 Code: Simple Steps To Get Your Car Running
Below are some possible fixes for the automobile fault code u0117, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code u0117, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors for any damage.
- Look for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U0117 Diagnosis Cost & Complexity
The automobile fault code U0117 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops. Therefore, the total cost of diagnosis and fixing the U0117 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.
U0117: Lost Communication With Vehicle Dynamics Control Module
The U0117 code is a Controller Area Network (CAN) fault code. CAN is a vehicle bus standard designed to interconnect automotive devices without a host computer. The U0117 code sets when a periodic message from the PTO Control Module has not been received.
The Diagnostic Trouble Code (DTC) indicates a lost communication with the PTO Control Module.
CAN bus uses two dedicated wires for communication, CAN high and CAN low. The CAN bus is NOT sensitive to inductive spikes, electrical fields, or other noise.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the u0117 fault code. This code is usually caused by a faulty PTO Control Module, an open or shorted PTO Control Module harness, or a poor electrical connection in the PTO Control Module circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the u0117 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may need to visually inspect the related wiring harness and connectors. This fault code is caused by a faulty PTO Control Module, an open or shorted PTO Control Module harness, or a poor electrical connection in the PTO Control Module circuit. To fix this issue, check the possible causes listed above and visually inspect the wiring harness and connectors for any damage or corrosion. Look for broken, bent, pushed out, or corroded connector’s pins.
Ignoring the u0117 fault code, which indicates a faulty PTO Control Module or related wiring issues, can lead to serious consequences. The engine light will remain on, indicating a problem, and the vehicle may experience reduced performance or even stall. Ignoring the issue can also lead to further damage to the vehicle’s electrical system. It is important to address the issue promptly by visually inspecting the wiring harness and connectors and checking for damaged components.
Wrap Up
If your engine light is on, it could be due to a faulty PTO Control Module, an open or shorted harness, or poor electrical connection. Visually inspect the wiring harness and connectors for damage or corrosion.
Check for broken, bent, or pushed out pins.
