[SOLVED] P3411 Code: Fixing Low Intake Valve Control Circuit In Cylinder 2

The P3411 fault code in automobiles indicates a problem with the Cylinder Deactivation System.

The symptoms of this fault code are not specific, but it can cause the Check Engine Light to turn on.

The possible causes of this fault code include low oil pressure, restricted oil passage, engine mechanical condition, faulty Cylinder Deactivation Solenoid, Cylinder Deactivation Solenoid harness is open or shorted, and Cylinder Deactivation Solenoid circuit poor electrical connection. The repair importance of this fault code is moderate, and the difficulty level is easy. To fix this issue, one should visually inspect the related wiring harness and connectors and check for damaged components.

The repair time for this fault code is 1.0 hour.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

Here are some common symptoms of the automobile fault code p3411:

  • The P3411 fault code is related to the camshaft position sensor circuit.
  • Symptoms of this fault code include: engine misfires, rough idling, stalling, reduced power, poor acceleration, decreased fuel efficiency, and difficulty starting the engine.
  • Additionally, the check engine light may illuminate and the vehicle may emit unusual noises or vibrations.
  • It is important to address these symptoms promptly to prevent further damage to the engine and ensure safe driving conditions.

P3411 fault code in automobiles can be caused by various factors such as low oil pressure, restricted oil passage, and faulty cylinder deactivation solenoid.

  • The automobile fault code P3411 can be caused by low oil pressure, restricted oil passage, engine mechanical condition, faulty Cylinder Deactivation Solenoid, Cylinder Deactivation Solenoid harness being open or shorted, and Cylinder Deactivation Solenoid circuit having poor electrical connection.

Below are some possible fixes for the automobile fault code p3411, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p3411, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P3411 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour. Therefore, the total cost of fixing the P3411 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.

P3411 is a fault code that indicates a problem with the cylinder deactivation system in the engine. When this code appears, the engine light or service engine soon warning light will turn on.

This fault code is commonly found in vehicles with V8 engines that use cylinder deactivation technology to improve fuel efficiency. If left unaddressed, this issue can lead to decreased engine performance and increased fuel consumption. It is important to have this issue diagnosed and repaired by a qualified mechanic as soon as possible to prevent further damage to the engine.

What are the possible causes of the P3411 automobile fault code?

The P3411 fault code in automobiles can be caused by low oil pressure, restricted oil passage, engine mechanical condition, faulty Cylinder Deactivation Solenoid, Cylinder Deactivation Solenoid harness being open or shorted, or Cylinder Deactivation Solenoid circuit having poor electrical connection. To fix this issue, one should check the possible causes listed above and visually inspect the related wiring harness and connectors. It is important to check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

How can one fix the P3411 automobile fault code?

If you’re experiencing the P3411 fault code, it could be due to low oil pressure, a restricted oil passage, engine mechanical condition, or a faulty Cylinder Deactivation Solenoid. To fix it, check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

What should be visually inspected when trying to fix the P3411 automobile fault code?

To fix the P3411 automobile fault code, start by checking the possible causes, which include low oil pressure, restricted oil passage, engine mechanical condition, faulty cylinder deactivation solenoid, cylinder deactivation solenoid harness that is open or shorted, and cylinder deactivation solenoid circuit poor electrical connection. Visually inspect the related wiring harness and connectors, checking for damaged components and looking for broken, bent, pushed out, or corroded connector’s pins.

p3411 error fault code explained

If you experience a lack of power or rough engine performance, it may be due to a P3411 fault code. Check for low oil pressure, restricted oil passage, or a faulty Cylinder Deactivation Solenoid.

Inspect the wiring harness and connectors for damage or corrosion.

Scroll to Top