The P3404 automobile fault code indicates a problem with the Valve Lifter Oil Manifold Assembly, which can cause the Engine Light to turn on. The possible causes of this fault code include low oil pressure, restricted oil passage, faulty valve lifter oil manifold assembly, open or shorted valve lifter oil manifold assembly harness, poor electrical connection in the valve lifter oil manifold assembly circuit, or a faulty Engine Control Module (ECM).
The repair importance is high as it can lead to engine damage if not addressed promptly.
The repair difficulty is moderate, and the fix involves visually inspecting the related wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins.
The repair time is estimated to be 1.0 hour.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P3404: Unsteady Engine Idling – Symptoms Explained
If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the p3404 fault code.
Here are the symptoms to look out for:
- The P3404 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include rough idling, poor acceleration, decreased fuel efficiency, engine misfires, and stalling.
- Additionally, the vehicle may experience a loss of power or have difficulty starting.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
P3404: Uncovering The Culprits Behind The Fault Code
The P3404 automobile fault code can be caused by various factors, including low oil pressure and faulty valve lifter oil manifold assembly.
- The automobile fault code P3404 can be caused by low oil pressure.
- It can also be caused by a restricted oil passage.
- Another cause of this fault code is a faulty Valve Lifter Oil Manifold Assembly.
- An open or shorted Valve Lifter Oil Manifold Assembly harness can also trigger this code.
- A poor electrical connection in the Valve Lifter Oil Manifold Assembly circuit can also be a cause.
- Lastly, a faulty Engine Control Module (ECM) can also be the reason behind the P3404 fault code.
Fix Code P3404: Simple Steps To Get Your Car Running
Listed below are possible fixes for the automobile fault code p3404, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code p3404, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors for any damage.
- Look for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P3404: Affordable Fix For Complex Auto Fault
The automobile fault code P3404 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour. Therefore, the total cost of diagnosing and fixing the P3404 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.
P3404: Your Engine’s Camshaft Position Sensor Is Malfunctioning
The P3404 code relates to the cylinder deactivation system in the engine.
The Engine Control Module (ECM) commands the cylinder deactivation system ON to deactivate engine cylinders 1, 7, 6, and 4, switching to a V4 mode. Cylinder deactivation is accomplished by not allowing the intake and exhaust valves to open on the selected cylinders by using special valve lifters.
The deactivation lifters contain spring-loaded locking pins that connect the internal pin housing of the lifter to the outer housing.
Switching between V8 and V4 modes is accomplished in less than 250 milliseconds, making the transitions seamless and transparent to the vehicle operator.
FAQ
If you’re experiencing the P3404 fault code, your engine light may be on. This could be due to low oil pressure, a restricted oil passage, a faulty valve lifter oil manifold assembly, an open or shorted valve lifter oil manifold assembly harness, a poor electrical connection in the valve lifter oil manifold assembly circuit, or a faulty engine control module. To fix the issue, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector pins.
If you’re experiencing the P3404 fault code, which is indicated by the engine light being on, it could be due to low oil pressure, a restricted oil passage, a faulty valve lifter oil manifold assembly, or a faulty engine control module. To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for any damaged components or broken, bent, pushed out, or corroded connector pins.
If you’re experiencing the P3404 automobile fault code, you may notice that your engine light is on. This could be caused by low oil pressure, a restricted oil passage, a faulty valve lifter oil manifold assembly, an open or shorted valve lifter oil manifold assembly harness, a poor electrical connection in the valve lifter oil manifold assembly circuit, or a faulty engine control module (ECM). To diagnose the issue, visually inspect the related wiring harness and connectors, checking for damaged components and broken, bent, pushed out, or corroded connector pins.
Wrap Up
If you see the Engine Light ON or Service Engine Soon Warning Light, check for low oil pressure, restricted oil passage, faulty Valve Lifter Oil Manifold Assembly, or a faulty Engine Control Module (ECM).
Visually inspect the wiring harness and connectors for damage, and check for broken, bent, pushed out, or corroded connector’s pins.
