[SOLVED] P3152 Code: Fixing High-Pressure Fuel Injector Circuit In Cylinder 2

The P3152 automobile fault code indicates a problem with Fuel Injector 2, which can cause the engine light to turn on. The possible causes include a faulty fuel injector, open or shorted fuel injector harness, poor electrical connection in the fuel injector circuit, or a faulty Digital Motor Electronics (DME).

It is important to visually inspect the wiring harness and connectors for any damage or corrosion.

The repair time for this issue is estimated at 1.0. To interpret the fault code, it is recommended to check the “Possible Causes” listed above and look for any broken or bent components.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the p3152 fault code.

Here are the symptoms to look out for:

  • The P3152 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, engine stalling, rough idling, and decreased fuel efficiency.
  • Additionally, the vehicle may experience difficulty starting, and there may be a noticeable decrease in acceleration.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The automobile fault code P3152 can be caused by a range of issues, including faulty fuel injectors and poor electrical connections.

  • The automobile fault code P3152 can be caused by a faulty fuel injector 2.
  • It can also be caused by an open or shorted fuel injector 2 harness.
  • Another possible cause is a poor electrical connection in the fuel injector 2 circuit.
  • Lastly, a faulty digital motor electronics (DME) can also trigger this fault code.

Below are the possible fixes for the automobile fault code p3152, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p3152, you need to check the possible causes listed above.
  • Inspect the wiring harness and connectors visually.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P3152 indicates a problem with the engine’s crankshaft position sensor.

The estimated repair time for this issue is 1.0 hour. The cost of fixing this issue can vary depending on the auto repair shop, but it is common for them to charge between $75 and $150 per hour.

Other factors that may influence the cost include the location of the repair shop, the make and model of the vehicle, and the severity of the issue.

The P3152 fault code is related to the high-pressure fuel injector in cylinder 2. The solenoid-controlled injection valve discharges a high-pressure spray into the combustion chamber. The fuel is injected into the combustion chambers under high pressure during the intake and compression strokes.

The DME diagnosis monitors the activation of the high voltage side of the fuel injector.

The DTC is detected when there is a short circuit to ground.

What are the possible causes of the automobile fault code P3152?

If you see the engine light on or the service engine soon warning light, it could be due to the P3152 fault code. This code is usually caused by a faulty fuel injector 2, an open or shorted fuel injector 2 harness, a poor electrical connection in the fuel injector 2 circuit, or a faulty digital motor electronics (DME). To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I fix the P3152 fault code in my automobile?

If you’re experiencing the P3152 fault code in your automobile, which is indicated by the engine light being on, it could be due to a faulty fuel injector 2, an open or shorted fuel injector 2 harness, a poor electrical connection in the fuel injector 2 circuit, or a faulty digital motor electronics (DME). To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

What should I visually inspect to identify the cause of the P3152 fault code?

If you’re experiencing the P3152 fault code, indicated by the Engine Light ON or Service Engine Soon Warning Light, you may have a faulty Fuel Injector 2, an open or shorted Fuel Injector 2 harness, a poor electrical connection in the Fuel Injector 2 circuit, or a faulty Digital Motor Electronics (DME). To identify the cause, visually inspect the related wiring harness and connectors, checking for damaged components and broken, bent, pushed out, or corroded connector’s pins. Check the “Possible Causes” listed above for further guidance.

p3152 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Fuel Injector 2, Fuel Injector 2 harness, Fuel Injector 2 circuit, or Digital Motor Electronics (DME).

Check the possible causes, inspect the wiring harness and connectors, and look for damaged components or corroded pins.

Scroll to Top