[SOLVED] P3149 Code: Fixing High-Pressure Fuel Injector Circuit In Cylinder 1

The P3149 automobile fault code indicates a problem with Fuel Injector 1, which can trigger the Engine Light or Service Engine Soon Warning Light. The possible causes of this issue include a faulty fuel injector, an open or shorted fuel injector harness, poor electrical connection in the fuel injector circuit, or a faulty Digital Motor Electronics (DME).

The importance of repairing this issue lies in the fact that it can lead to poor engine performance and fuel economy. The repair difficulty is moderate, and it takes around 1.0 hour to fix. To interpret the fault code, one needs to check the possible causes listed above and visually inspect the related wiring harness and connectors for any damage or corrosion.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the p3149 fault code. Here are the symptoms to look out for:

  • The P3149 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, engine stalling, rough idling, decreased fuel efficiency, and difficulty starting the engine.
  • Additionally, the vehicle may experience transmission shifting issues, and there may be a noticeable decrease in overall performance.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code P3149 can be caused by a range of issues, including faulty fuel injectors and poor electrical connections.

  • The automobile fault code P3149 can be caused by a faulty fuel injector 1.
  • It can also be caused by an open or shorted fuel injector 1 harness.
  • Poor electrical connection in the fuel injector 1 circuit can also trigger this fault code.
  • Lastly, a faulty digital motor electronics (DME) can also be a cause of the P3149 fault code.

Below are the possible fixes for the automobile fault code p3149, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code P3149, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P3149 has an estimated repair time of 1.0 hour.

The cost of fixing this fault code is influenced by the repair time. Most auto repair shops charge between $75 and $150 per hour for their services.

Therefore, the fixing cost of P3149 will be between $75 and $150, depending on the repair time required.

The P3149 fault code is related to the solenoid-controlled injection valve in the combustion chamber. This valve discharges a high-pressure spray of fuel into the chamber. The fault code is triggered when there is a short circuit to ground in the high voltage side of the fuel injector in cylinder 1.

The DME diagnosis monitors the activation of the high voltage side of the fuel injector to detect this fault code.

Fixing this fault code requires identifying and repairing the short circuit to ground in the high voltage side of the fuel injector in cylinder 1.

What are the possible causes of the automobile fault code P3149?

If you see the engine light on or service engine soon warning light, it could be due to the P3149 fault code. This code is usually caused by a faulty fuel injector 1, an open or shorted fuel injector 1 harness, a poor electrical connection in the fuel injector 1 circuit, or a faulty digital motor electronics (DME). To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I fix the P3149 fault code in my automobile?

If you’re experiencing the P3149 fault code in your automobile, which is indicated by the engine light being on, it could be due to a faulty fuel injector 1, an open or shorted fuel injector 1 harness, a poor electrical connection in the fuel injector 1 circuit, or a faulty Digital Motor Electronics (DME). To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

What should I visually inspect to identify the cause of the P3149 fault code?

If you’re experiencing the P3149 fault code, indicated by the engine light or service engine soon warning light turning on, there are a few possible causes to consider. These include a faulty fuel injector 1, an open or shorted fuel injector 1 harness, a poor electrical connection in the fuel injector 1 circuit, or a faulty digital motor electronics (DME). To identify the cause, visually inspect the related wiring harness and connectors, checking for damaged components and broken, bent, pushed out, or corroded connector pins.

p3149 error fault code explained

If your engine light is on, it could be due to a faulty fuel injector 1, poor electrical connection, or a faulty DME. Check the possible causes, inspect the wiring harness and connectors, and look for damaged components or corroded pins.

Scroll to Top