[SOLVED] P311B Code: Fixing High Pressure Fuel Injector Electrical Issue

The P311B automobile fault code indicates a problem with Fuel Injector 3, which can trigger the Engine Light or Service Engine Soon Warning Light. The possible causes of this issue include a faulty fuel injector, an open or shorted fuel injector harness, poor electrical connection in the fuel injector circuit, or a faulty Digital Motor Electronics (DME).

The importance of repairing this issue lies in the fact that it can lead to poor engine performance and fuel economy.

The repair difficulty is moderate, and it takes around 1.0 hour to fix.

To interpret the fault code, one needs to check the possible causes listed above and visually inspect the related wiring harness and connectors for any damage or corrosion.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p311b fault code.

Here are the symptoms to look out for:

  • The P311B fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, engine stalling, rough idling, and decreased fuel efficiency.
  • Additionally, the vehicle may experience difficulty starting, poor acceleration, and increased emissions.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The automobile fault code p311b can be caused by a faulty fuel injector, open or shorted harness, poor electrical connection, or a faulty DME.

  • The automobile fault code P311B can be caused by a faulty fuel injector 3.
  • It can also be caused by an open or shorted fuel injector 3 harness.
  • Another cause can be a poor electrical connection in the fuel injector 3 circuit.
  • Lastly, a faulty digital motor electronics (DME) can also trigger this fault code.

Below are some possible fixes for the automobile fault code p311b, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p311b, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P311B has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time.

Most auto repair shops charge between $75 and $150 per hour for their services.

Therefore, the fixing cost of P311B will be between $75 and $150, depending on the repair time required.

The P311B fault code is related to the solenoid-controlled injection valve in the combustion chamber. This valve discharges a high-pressure spray of fuel into the chamber.

The fault code is triggered when there is a short circuit between the high-voltage and low-voltage sides of the fuel injector.

This fault code affects cylinder 3 and is related to the electrical components of the high-pressure fuel injector. It is important to address this fault code promptly to ensure proper fuel injection and efficient engine performance.

What are the possible causes of the P311B fault code?

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the P311B fault code. This code is usually caused by a faulty Fuel Injector 3, an open or shorted Fuel Injector 3 harness, a poor electrical connection in the Fuel Injector 3 circuit, or a faulty Digital Motor Electronics (DME). To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.

How can I fix the P311B fault code?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light with a P311B fault code, it could be due to a faulty Fuel Injector 3, open or shorted Fuel Injector 3 harness, poor electrical connection in the Fuel Injector 3 circuit, or a faulty Digital Motor Electronics (DME). To fix the issue, visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

What should I visually inspect to troubleshoot the P311B fault code?

If you’re experiencing the P311B fault code, which is indicated by the engine light or service engine soon warning light turning on, there are a few things you can visually inspect to troubleshoot the issue. The possible causes include a faulty fuel injector 3, an open or shorted fuel injector 3 harness, poor electrical connection in the fuel injector 3 circuit, or a faulty digital motor electronics (DME). To fix the issue, check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and broken, bent, pushed out, or corroded connector pins.

p311b error fault code explained

If your engine light is on and the fault code is P311b, it could be due to a faulty fuel injector 3, open or shorted harness, poor electrical connection, or faulty DME. Visually inspect the wiring harness and connectors for damage or corrosion.

Check for broken, bent, or pushed out connector pins.

Scroll to Top